Scrivi una recensione
Le valutazioni verranno attivate dopo la verifica.

I campi indicati con l'asterisco * sono obbligatori.
Cliccando su "Salva" autorizzo il trattamento dei dati personali secondo le modalità indicate nell'Informativa sulla privacy di SCOOTER CENTER GmbH.

 
 
L'articolo è stato aggiunto correttamente.

Lambretta (Innocenti) TV 175 (serie 1)

Lambretta (Innocenti) TV 175 (serie 1)

Descrizione


Lambretta TV 175
Series 1

The TV was Innocenti's new flagship, but it was not without problems as the engine had a few design flaws, especially the clutch was too weak. Still it was a milestone for Innocenti, forming the link between the old D models and all later models of the LI series. After only 10.086 scooter built, production of the TV Series I ceased in December 1958.

So the task of becoming the actual forefathers of all Lambrettas to follow was taken over by the “bread-and-butter” versions, the 125 and 150 LI, where all the design flaws of the TV had been done away with. Both engines were totally reliable and made the LI Series I a great commercial success for Innocenti with more than 150.000 scooters produced. The engines were already very similar to the usual LI type, even if the first models came without a chain tensioner and only one oil seal in the mag housing, which was lubricated by the petrol/oil mixture. This was changed during the production run at the same time when the oil thrower under the front sprocket was added to ease life for the drive-side oil seal. Both the chain tensioner and the grease-lubricated flywheel bearing became standard with all subsequent Lambrettas, so that the final design of the Lambretta engine was reached further improvements mainly were aimed at strengthening certain parts like the crank and its bearings.

Apart from minor differences the bodywork of the LI is identical to that of the TV 175. The little design alterations are rather there to highlight the status of the models. For instance, the LI 150 had alloy floorboard strips with rubber inlays and end caps, while the LI 125 only came with simple alloy ribs. The handlebar-ends were painted at the 125, while they were from polished alloy at the 150. The rubber parts and cables are grey at both models, with the notorious exception of the black stand feet and kickstart rubber of course. Not to forget the gasket under the rear light, which is coloured white. Colour schemes are two-tone grey for the LI 125, while the LI 150 boasts a number of options, including two-tone versions with grey base and blue, green or red side-panels and horncasting.

Model:
Capacity:
Production period:
Quantity:
Production code:
1st frame no.:
TV 175
175 cc
09/57-12/58
10.089
175TV
1.001

 

TV series 1 – 1st version
(September 1957 until April 1958)

The air intake is now between the seats via an airbox, with an oval air filter. The tank vent is now through the filler cap. The brake-pedal receives a small splashplate.

 

TV series 1 – 2nd version
(May until July 1958)

Horn grille is a separate piece screwed into the horncasting, the ball-bearing in the mag housing is replaced by a roller bearing. The splashplate at the main stand is introduced. The centre hub at the rear hub is secured by a locking washer.

 

TV series 1 – 3rd version
(August until December 1958)

The adjustable levers are discontinued.

 

Original paint (Lechler)

 

Avorio (Elfenbein)
8028
Farbkarte

 

 
Veicolo (generale)
denominazione: TV 175 (serie 1)
anno di costruzione: 1957, 1958
numero telaio: 175TV
numero esemplari prodotti: 10089
colori: avorio (8028)
Veicolo dimensioni
lunghezza: 1825 mm
larghezza: 710 mm
altezza: 1038 mm
altezza seduta: 787 mm
altezza dal suolo: 165 mm
interasse: 1290 mm
capacità serbatoio benzina: 8.5 l
di cui riserva (benzina): 1.2 l
peso (a vuoto): 120 kg
Veicolo ruote
pneumatico anteriore: 3.50 - 10
pneumatico posteriore: 3.50 - 10
cerchio ruota anteriore: 2.15 - 10
cerchio ruota posteriore: 2.15 - 10
Veicolo freni
tipo freno anteriore: freno a tamburo
azionamento freno anteriore: meccanico con cavo
Ø anteriore: 150 mm
tipo freno posteriore: freno a tamburo
azionamento freno posteriore: meccanico con cavo
Ø posteriore: 150 mm
Veicolo sospensione
tipo sospensione anteriore: ammortizzatore con serbatoio separato, forcella trailing link
tipo sospensione posteriore: ammortizzatore
Veicolo motore
cilindrata: 170 cm³
corsa: 60 mm
alesaggio: 60 mm
tipo di motore: 2 tempi
numero cilindri: 1
tipo di raffreddamento: ad aria
potenza (kW): 6.33 kW
potenza (CV): 8.6
giri/min (P max): 6000
rapporto di compressione: 1:7.6
preparazione miscela: carburatore
carburatore: Dell'Orto MB23 BS5
avviamento: leva avviamento
frizione: manuale
marca motore: Innocenti
velocità massima: 103 km/h
tipo motore: 2 tempi
normativa emissioni: nessuna
Veicolo motore - accensione
tipo di accensione: accensione a puntine
anticipo accensione: 27
distanza contatti: 0.45 mm
potenza (luce): 30 W
tensione: 6 V
candela: (NGK) B7ES
Veicolo motore - ingranaggi cambio
tipo cambio: manuale
numero marce: 4
Fahrzeug Betriebsstoffe
carburante: Super (ROZ 95)
rapporto miscela: 1:16
olio ingranaggi: SAE30
quantità olio ingranaggi: 1 l
I clienti cercavano in alternativa
Articoli visualizzati di recente