Evaluar
Las evaluaciones serán publicadas tras una comprobación.

Los campos marcados con * son obligatorios.
Al hacer clic en "Enviar" o "Guardar" consiento que mis datos personales sean tratados conforme a los términos y condiciones de la política de privacidad de SCOOTER CENTER GmbH.

 
 
El artículo se ha añadido correctamente.

Lambretta (Innocenti) DL 150 (GP 150)

Lambretta (Innocenti) DL 150 (GP 150)

Descripción


Lambretta GP/DL 150

The DL / GP range supersedes all LI, Special, SX and TV models in 1969. In most countries the models were marketed as Lambretta DL, while in the UK the distinctive label Grand Prix (GP) was used similarly to the earlier GT, to create a link to the then booming Grand Prix racing. This relation is reflected by the adverts and slogans of the time (“A real goer!”) and perfectly suits the sporty appearance of the scooter. The DL / GP range was available with the usual three capacities, even if the engines had been significantly reworked.

The new bodywork, styled by the famous Italian automotive designer Bertone, is shorter and slimmer than before. The legshields and horcasting have been shortened to lower the handlebars, headset and headlight are now rectangular. The front mudguard has a more aggressive pointed shape, forks, hubs and wheel-rims are now painted silver as standard. The taillight is made from black plastic as all other plastic parts are coloured black, while any chrome has been completely abandoned. The plain side panels have black rally-stripes attached and incorporate grilles which are also made from black plastic.

The DL 125 takes over the engine of the 125 Special. Engine numbers still start with LI125S. Besides the rear sprocket, which is no longer riveted together but made from billet steel, the main change is the crankshaft, which features a much stronger taper to take the flywheel. Also, the drain valve on the inlet rubber hose was abandoned.

Even if the DL 150 engine also retains the engine numbers of the SX150, changes are much more refined: in addition to the aforementioned changes, the port layout of the cylinder is altered. Also, a larger carb with 22 mm bore is used, which does not raise peak power delivery very much (9,4 hp), but increases the useable rev range.

Also the 200 cc engine still bears the SX200 engine numbers, even if a number of significant changes are made. The improvements to crankshaft and inlet rubber hose are the same as with the smaller models, but the gearing is changed completely to a much shorter overall ratio (5,22 instead of 4,80 on the SX). The gearbox was taken over from the LI 125 Special, but primary gearing was reverted to a 18/47 sprocket ratio. The engine now keeps up speed much better even under adverse conditions and reaches 110 kph top speed with greatly improved acceleration. A 22 mm carb is used as on the DL 150.

But the ultimate improvement for the DL 200 was the introduction of an electronic ignition, which was developed in co-operation with Ducati. The DL 200 Electronic is easily recognised by a sticker on the legshields and a different seat. This newly shaped seat with its structured cover is a clear reminder of the 70s sports car interiors. Unfortunately no production numbers of the Electronic are known, as it was produced from 1970 onwards alongside the standard version with points ignition.

Also colour schemes are changed drastically. The late 60s fashion of colourful designs is taken over, so that the DL 125 is available in turquoise or white colour. The DL 150 is sold in Italy in red, whereas some export-markets receive two-tone colour schemes. While the basic colour is always white, side-panels, horncasting and mudguard are available in red or blue. The DL 200 in Italy is available only in ochre, while customers abroad can chose from either ochre or red.

During the short production run, some minor changes are made. Early models have the horncasting cover and rear frame grille painted in the same colour as the rest of the bodywork, while later these parts are superseded by black plastic items. Also the alloy choke and petrol tap levers and the grey plastic glovebox are being replaced by black plastic versions. The very latest models had screws M6 x 30 instead of nuts and bolts to hold the chaincase cover.

In April 1971 the last DL / GP Lambrettas rolled off Innocenti's production line. With 15300 DL 125 models, 21050 DL 150 models and 9302 200cc models, production numbers were rather low. The complete production line was then sold to India, were the GP 200 was continued to be produced.

Model:
Capacity:
Production period:
Quantity:
Production code:
1st frame no.:
GP 150
150 cc
01/69-04/71
20.048
22/0
200.001

 

GP/DL – 1st version
(January 1969 until mid 1970)

horncasting-grille, rear frame grille and tank flap made from metal

 

GP/DL – 2nd version
(mid 1970 until april 1971)

horncasting-grille, rear frame grille and tank flap made from plastic

 

Original paint (Lechler)

Biancospino
8082 (*1)
Farbkarte
Rosso
8073 (*1)
Farbkarte
Biancospino
8082 (*2)
Farbkarte
Rosso
8073 (*3)
Farbkarte
Blu
? (*3)
Farbkarte

(*1) = single colour paint scheme
(*2) = two colour paint scheme (frame)
(*3) = two colour paint scheme (panels)

 

 
Vehículo (general)
Modelo: DL 150 (GP 150)
Año/s de producción: 1969, 1970, 1971
N.° de chasis: 22/0
Unidades fabricadas: 20048
Colores: biancospino (8082)
Vehículo dimensiones
Longitud: 1800 mm
Anchura: 680 mm
Altura: 1012 mm
Altura del asiento: 772 mm
Altura al estribo: 165 mm
Distancia entre ejes: 1292 mm
Capacidad depósito combustible: 8.1 l
Reserva incl. (combustible): 0.75 l
Peso (en vacío): 105 kg
Peso (en funcionamiento): 118 kg
Peso (máx.): 263 kg
Vehículo ruedas
Rueda delantera: 3.50 - 10
Rueda trasera: 3.50 - 10
Llanta delantera: 2.15 - 10
Llanta trasera: 2.15 - 10
Vehículo frenos
Tipo de freno delantero: freno de tambor
Accionamiento del freno delantero: mecánico con cables
Ø delantero: 150 mm
Tipo de freno trasero: freno de tambor
Accionamiento del freno trasero: mecánico con cables
Ø trasero: 150 mm
Vehículo suspensión
Tipo de suspensión delantera: horquilla adelantada, solo muelle
Tipo de suspensión trasera: conjunto muelle-amortiguador
Vehículo motor
Cilindrada: 148 cm³
Carrera: 58 mm
Diámetro: 57 mm
Tipo de motor: 2 tiempos
Número de cilindros: 1
Tipo de refrigeración: por aire
Potencia (kW): 6.91 kW
Potencia (cv): 9.4
Revolución por minuto (potencia máx.): 6300
Compresión: 1:7.8
Alimentación: carburador
Carburador: Dell'Orto SH2/22
Arranque: pedal
Embrague: manual
Fabricante del motor: Innocenti
Velocidad máx.: 101 km/h
Tipo de motor: 2 tiempos
Norma de emisión: sin
Vehículo motor - encendido
Tipo de encendido: con platinos
Avance de encendido: 21
Distancia entre contactos: 0.4 mm
Potencia (luz): 30 W
Tensión: 6 V
Bujía: (NGK) B7ES
Vehículo motor - caja de cambios
Caja de cambios: manual
Número de velocidades: 4
Relación de transmisión primaria - 1:: 3.0666
Relación de transmisión 1.a velocidad - 1:: 5
Relación de transmisión 2.a velocidad - 1:: 3.5
Relación de transmisión 3.a velocidad - 1:: 2.6
Relación de transmisión 4.a velocidad - 1:: 1.842
Relación de transmisión total - 1:: 5.649
Vehículo líquidos
Carburante: Super (ROZ 95)
Mezcla: 1:50
Lubricante engranaje: SAE80
Cantidad lubricante engranaje: 0.7 l
Los clientes buscaron alternativamente
Productos vistos últimamente