Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Wheel pin overhaul kit -BGM ORIGINAL- Vespa PX EFL (1984-, V8X1T , VLX1T , VNX1T , VNX2T , VSX1T , ZAPM09, ZAPM18, ZAPM50, ZAPM51, ZAPM74), Vespa T5 125 (VNX5T), Vespa Cosa 125-200 (VSR1T, VNR1T, VNR2T), Vespa PK 50 (V5X1T), Veapa PK 50 XL2 Automa

BGM7920
Wheel pin overhaul kit -BGM ORIGINAL- Vespa PX EFL (1984-, V8X1T , VLX1T , VNX1T , VNX2T , VSX1T , ZAPM09, ZAPM18, ZAPM50, ZAPM51, ZAPM74), Vespa T5 125 (VNX5T), Vespa Cosa 125-200 (VSR1T, VNR1T, VNR2T), Vespa PK 50 (V5X1T), Veapa PK 50 XL2 Automa
Wheel pin overhaul kit -BGM ORIGINAL- Vespa PX EFL (1984-, V8X1T , VLX1T , VNX1T , VNX2T , VSX1T , ZAPM09, ZAPM18, ZAPM50, ZAPM51, ZAPM74), Vespa T5 125 (VNX5T), Vespa Cosa 125-200 (VSR1T, VNR1T, VNR2T), Vespa PK 50 (V5X1T), Veapa PK 50 XL2 Automa
Wheel pin overhaul kit -BGM ORIGINAL- Vespa PX EFL (1984-, V8X1T , VLX1T , VNX1T , VNX2T , VSX1T , ZAPM09, ZAPM18, ZAPM50, ZAPM51, ZAPM74), Vespa T5 125 (VNX5T), Vespa Cosa 125-200 (VSR1T, VNR1T, VNR2T), Vespa PK 50 (V5X1T), Veapa PK 50 XL2 Automa
Wheel pin overhaul kit -BGM ORIGINAL- Vespa PX EFL (1984-, V8X1T , VLX1T , VNX1T , VNX2T , VSX1T , ZAPM09, ZAPM18, ZAPM50, ZAPM51, ZAPM74), Vespa T5 125 (VNX5T), Vespa Cosa 125-200 (VSR1T, VNR1T, VNR2T), Vespa PK 50 (V5X1T), Veapa PK 50 XL2 Automa
Wheel pin overhaul kit -BGM ORIGINAL- Vespa PX EFL (1984-, V8X1T , VLX1T , VNX1T , VNX2T , VSX1T , ZAPM09, ZAPM18, ZAPM50, ZAPM51, ZAPM74), Vespa T5 125 (VNX5T), Vespa Cosa 125-200 (VSR1T, VNR1T, VNR2T), Vespa PK 50 (V5X1T), Veapa PK 50 XL2 Automa

Description


BGM original swing arm bearing set for revision of the bearing between fork and swing armThe

connection between steering tube and front swing arm is a highly stressed component in the Vespa models. Forces from all directions must be safely absorbed and transmitted.
The swing arm bearing is responsible for precise wheel guidance and transmits the steering impulse. Thus also a TÜV relevant component. The bearings are fixed by pressed-in staples.
The bolt is fixed in the steering tube and is guided in needle bearings in the aluminium swing arm. These are sealed by O-rings and V-rings.
If these are brittle due to aging, water can penetrate and destroy the bearings.


Complete bearing set for the connection of the swing arm to the head tube. Suitable for all Vespa / Piaggio models with single-sided swingarm from 1984 onwards.

The repair should be done with a strong press

.
  • Bearing boltØ: 16
  • Bearing bolt length: 56mm
  • Bearing outsideØ: 22mm,
  • Incl. V-rings (without O-rings) and safety clamps.

    AI-translation

     
    €21.00 *

    incl. VAT plus shipping costs

    Available immediately (delivery time 1-3 working days*)
    P For this item you get fidelity point/s
    OEM numbers (for comparison purposes only)
    Piaggio 198513, 1C001985, 177451, 137146
    Customers alternatively searched for
    Schwingenlagersatz | Schwingenlager | Gabelschwinge | Lagerachse | Gabellagerung | Schwingenlagerung | Schwinglagerachse | Schwingenlagerachse | Lagerung | Gabel | Lenkrohr | Lager | Schwingenbolzen | Gabelrevision | Überholen | Revidieren | Instandsetzen | Reparieren | Schwinge | Umpressen | Einpressen | Nadellager | Wheel | Pin | Overhaul | Kit | Kit Réparation Axe De Roue | Altalena Rilevamento Impostato | Kit De Rodamientos De Suspensión |
    BGM original swing arm bearing set for revision of the bearing between fork and swing armThe...Continue reading

    In exploded views


    Fits the following vehicles


    Ratings


    4 Jan 2021
    Good quality but one problem

    everything good except the retaining clips are made from mild steel. They should be spring steel.

    Recently viewed items