Write a review
Evaluations will be activated after verification.
Item successfully added.
variator kit / vario kit -101 OCTANE- for GY6 50cc, Kymco 50cc
Part no.:
IP12012
Description
Low-priced complete variator in original part quality. The variator is supplied as shown with variator, counter pressure plate, V-belt pulley, fan wheel, sliders, Vario sleeve, star washer and 6.8g variator weights in the dimensions 16x13mm.
The use of a new variator is recommended in case of acceleration holes caused by a defective liner and the consequent "jamming" of the variator and in case of run-in variator (rings on the V-belt running surface).
Outer diameter: 87,00mm
Our tip: The factory setup of the scooter manufacturer is not very rev-happy. If you want to optimize the starting behavior a little lighter variator weights. According to our experience, the scooter shifts and turns with weights in the range of 5.5-6.0 grams somewhat more zippy.AI-translation
The use of a new variator is recommended in case of acceleration holes caused by a defective liner and the consequent "jamming" of the variator and in case of run-in variator (rings on the V-belt running surface).
Outer diameter: 87,00mm
Our tip: The factory setup of the scooter manufacturer is not very rev-happy. If you want to optimize the starting behavior a little lighter variator weights. According to our experience, the scooter shifts and turns with weights in the range of 5.5-6.0 grams somewhat more zippy.
€26.50 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Customers alternatively searched for | |
|---|---|
| Variomatik | Vario | Variator | Pulley | Cvt | Variomatic | Treibende | Kit | Kit Variateur | Variatore | | |
Recently viewed items