Write a review
Evaluations will be activated after verification.
Item successfully added.
Tuning set for PHBH carburettor -BGM PRO- Dellorto PHBH 28, PHBH 30 (two-stroke) - main jets (130, 135), secondary jets (58, 60), mixing tube (AS266), needles (X3, X7, X13)
Part no.:
BGM8549
Description
CARBURETOR TUNING KIT BGM FOR DELL'ORTO PHBH28 / PHBH30
Tuning kit for the classic Dell'Orto PHBH series or its replicas (YSN)
SCOPE OF SUPPLY
Main jets: 130,135
Secondary jets: 58,60
Mixing tube: AS266
Needles: X3, X7, X13
The set offers a very good basic tuning for almost all tuned Vespa engines.
MAIN JET
The main jet settles at around 130-135 for most engine setups. Only rotary valve-controlled Vespa engines usually run significantly leaner (120-125).
SIDEJET
The side jet tends to be used in the 55 range for Vespas. This is usually part of the basic setup of PHBH carburetors, so it is not included in this set.
NEEDLE
The X2 needle is often used in the Vespa range, but this is fitted ex works in 90% of all PHBHs, so it is not included in this set.
The X7 and X13 needles are variants of the X2 needle. The X3 needle has also proven to be a very good all-round needle.
MIXING TUBE
The PHBH carburetors are adapted to their intended use (2-stroke or 4-stroke) via the mixing tube. Type AV is often used for 2-strokes. However, this often tends to grease the engines with a short slide stroke. The (shorter) AS type runs much better here.
With this set you are able to provide a very good basic setup for your engine.
+----------+
Manufacturer Information
bgm
Kurt-Schumacher-Straße 1
50129 Bergheim - Germany
https://www.scooter-center.com/
info@scooter-center.com
Responsible Person for the EU
Scooter Center GmbH
Kurt-Schumacher-Str. 1
50129 Bergheim-Glessen - Germany
https://www.scooter-center.com/
info@scooter-center.com
€17.90 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Customers alternatively searched for | |
|---|---|
| Vergaserrevision | Kit | Vergaserreperatur | Kit | Vergaserüberholung | Vergaserrevision | Vergaserreparatur | Vergaserinstandsetzung | Revision | Reparatur | Instandsetzung | Überholung | Vergaser | Ersatzteile | Kleinteile | Leerlaufschraube | Luftschraube | Gemischschraube | Standgasschraube | Carburator | Repair | Kit | Carburettor | Carburetor | Carb | Pochette De Joints De Carburateur | Kit Revisione Carburatore | Kit Revisión Carburador | | |
Related items
variants
bgm Pro
BGM8504F
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - spring loaded
BGM8504F
further versions from €6.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
variants
bgm Pro
BGM8504S
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded
BGM8504S
further versions from €6.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
Recently viewed items