Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Tuning kit -BGM- with ECU / CDI - Euro 4 - Vespa Primavera 50, Sprint 50, Piaggio Liberty 50 , Zip 50

BGM39055
Tuning kit -BGM- with ECU / CDI - Euro 4 - Vespa Primavera 50, Sprint 50, Piaggio Liberty 50 , Zip 50
Tuning kit -BGM- with ECU / CDI - Euro 4 - Vespa Primavera 50, Sprint 50, Piaggio Liberty 50 , Zip 50
Tuning kit -BGM- with ECU / CDI - Euro 4 - Vespa Primavera 50, Sprint 50, Piaggio Liberty 50 , Zip 50
Tuning kit -BGM- with ECU / CDI - Euro 4 - Vespa Primavera 50, Sprint 50, Piaggio Liberty 50 , Zip 50
Tuning kit -BGM- with ECU / CDI - Euro 4 - Vespa Primavera 50, Sprint 50, Piaggio Liberty 50 , Zip 50
Tuning kit -BGM- with ECU / CDI - Euro 4 - Vespa Primavera 50, Sprint 50, Piaggio Liberty 50 , Zip 50

Description


De-throttling the new Piaggio iGet Euro4 engines, such as those installed in Vespa Primavera, Vespa Sprint 50 or Piaggio Liberty and Zip Euro4 engines 2017-2019, is no longer possible without intervention in the engine control unit and is therefore difficult for a layman to implement. As a rule, an engine tester is required, which only the authorized dealer has available.

The BGM de-throttling kit has an open, unthrottled ECU / CDI ignition box, which does NOT need to be tuned with an engine tester on the vehicle. Simply plugging it in is sufficient. During subsequent operation, this is also recognized by the tester during a workshop visit and is not indicated as a fault. However, to prevent the engine from over-revving, the ignition curve is also locked with the Naraku ECU, significantly later than with the factory control unit, but at a safe 10,000.

The scooter has 2 anti-manipulation screws installed on the Vario cover; these are replaced by the two Piaggio OEM screws supplied. A new open intake hose is also included in the kit, which increases the air flow. Variator rollers and clutch springs suitable for the new engine output are included in the kit and simply need to be fitted.

With a sports variator such as the Naraku NK901.27, maximum speed and acceleration can be further increased (tuning required).

Naraku offers a complete and easy to install kit for de-throttling the new Piaggio / Vespa iGet Euro4 engines. No tuning or engine tester necessary.

The kit contains

- open CDI / ECU ignition unit (engine protection at 10,000 rpm)
- open intake bellows / intake hose
- Vario weights matched to the kit
- replacement screws for variator cover
- reinforced clutch springs matched to the kit

AI-translation

 
€292.95 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Customers alternatively searched for
Tuningkit | Upgradekit | Tuningset | Tuningsatz | Motortuning | Tuning | Leistungskit | Powerkit | Zylindersatz | Zylinderkit | Kit Cylindre | Kit Cilindro | E4 | Euro4 | Euro 4 | ECU |
De-throttling the new Piaggio iGet Euro4 engines, such as those installed in Vespa Primavera,...Continue reading

Fits the following vehicles


Recently viewed items