Tank cover XL -MC XLTC- aluminium black - Piaggio Ciao | Frame parts | Bodywork | Frame

Preview: Tank cover XL -MC XLTC- aluminium black - Piaggio Ciao

Description

Here it is! The MCXLTC - X-TRA LARGE TANK COVER FOR THE PIAGGIO CIAO!

⭐ 20 mm wider, 3 mm deeper.
⭐ More space at the transition tank > cylinder head including the possibility of fine adjustment.
⭐ Wider slots in the middle area for e.g. Koso head temperature sensors (and their connectors) or similar.
⭐ Wider and deeper side opening for hydraulic brake lines, which can be routed to the rear or front as required.
⭐ Enough space for elaborate electrics, e.g. when using a tachometer, USB charger, etc.

⭐CNC-manufactured from 6061 T6 aluminum & anodized black.

The bearing surface of the MCXLTC was designed to "just barely" touch the tank when fully tightened.
So the cover does not drill directly into your expensive paint.
In addition, this is also designed a little wider,
so that the most finicky among you can stick the support surface if necessary, for example, felt
and thus any paint damage is finally a thing of the past.

⭐ Scope of delivery

1x MCXLTC - X-TRA LARGE TANK COVER, black anodized
1x MCPROPARTS sticker

Instructions:

Before mounting, check/ensure that.

⭐ the plates with the bolt-on points on the frame are not crooked,
⭐ the plate has been centered,
⭐ the fork & frame are not warped.

On the other hand, it can happen that the MCXLTC grinds slightly at full 100% steering stop on the fork.
This is in the worst case only super minimal and rather a slight scratching in the range of 1...2/10 mm,
however, this should be checked, because you can not exclude that over the years (years of construction)
perhaps times was not 100% worked and it may not be visible to the naked eye,
whether the fork / frame have a distortion.

If all the above points are observed and the frame / fork is not crooked, warped, etc.,
should be about 2 mm to 3 mm space to the MCXLTC at full steering stop depending on the Ciao model.

In addition, care should be taken to ensure that the screws are the correct length.
We recommend using washers,
as this makes centering easier due to the milled pocket in the MCXLTC.

❗
Not suitable for Piaggio Ciao Series 1 and Ciaos with a different / narrower wheelbase!
Mostly these are older models before 1975.
In these models, the fork- fork mount sits at a different angle and therefore closer to the tank.

_{AI-translation}

€89.95 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)

P For this item you get fidelity point/s

Customers alternatively searched for
Tank \| Tankabdeckung \| Tankverkleidung \| Abdeckung \| Deckel \| Trittbrett \| Serbatoio \| Coperchio del serbatoio \| Coperchio del serbatoio \| Coperchio \| Pedana di marcia \| Tank \| Tank cover \| Tank cover \| Cover \| Footboard \|Réservoir \| Couvercle de réservoir \| Habillage de réservoir \| Couvercle \| Marchepied \| Cisterna \| Tapa de cisterna \| Tapa de cisterna \| Tapa \| Estribo \| MC \| MCPROPARTS \| mcproparts \|

Customers alternatively searched for