Write a review
Evaluations will be activated after verification.
Item successfully added.
Stud -M8 x 165mm- -PIAGGIO- (used for cylinder Piaggio Quasar, HPE 250-300 cc)
Part no.:
7670297
Description
Original Piaggio stud bolt (tie rod) for fixing the cylinder and cylinder head to the engine housing of all Vespa engines from 160ccm displacement. Can also be used in the engines of the Lambretta series 1-3 models. The thread of the Piaggio cylinder studs is rolled, not cut. Therefore they have a very high tensile strength and can handle much more tightening torque than the specified 22-24Nm for cylinder mounting.
(US)
AI-translation
Another special feature are the different core diameters of the threads. The side that is screwed into the engine housing has a slightly larger core diameter than the cylinder head side. Due to this oversize, the bolts can be screwed into the housing relatively tightly, but they always remain in the housing even when the cylinder head nuts are loosened and do not rotate.
The side that should face the cylinder head is marked with a narrow turned in circular groove. Older bolts have a grain knock on the upper side of the bolt.
Some Piaggio bolts already have a factory-applied threadlocker (usually blue). This marks the side to be screwed into the motor housing.
(US)
AI-translation
€9.20 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Studs | |
|---|---|
| material: | steel |
| total length: | 165,0mm |
| thread 1: | M8x1,25 |
| length of thread 1: | 21,5mm |
| thread 2: | M8x1,25 |
| length of thread 2: | 21,5mm |
| length shaft: | 120,0mm |
| diameter shaft: | 6,2mm | 7,2mm |
| one thread is screw in type: | |
| quantity incl.: | 1 |
| OEM numbers (for comparison purposes only) | |
| Piaggio | 1A003628R, 840332, 877285 |
| Customers alternatively searched for | |
|---|---|
| Stehbolzen | Gewindebolzen | Gewindestange | Bolzen | Zylinderstehbolzen | Zylinderschrauben | Schrauben | Zylinderbefestigung | Festmachen | Zuganker | Zugbolzen | Dehnschrauben | Stud | Goujon | Prigiorniero | Esparrago | | |
Related items
Casa Lambretta
7674034
Nut high type -similar to DIN 934- M8, WS=14 (used for exhaust/engine casing cover Lambretta LI, LIS, SX, TV, DL, GP, wheel rim Lambretta A, B, C, LC, D, LD, E, F)
7674034
The item is ordered and will be in stock soon
€1.19
*
*incl. VAT plus shipping costs
Recently viewed items