Stud -M8 x 160mm- -PIAGGIO- (used for cylinderVespa PX200, Rally180 (VSD1T), Rally200 (VSE1T), SS180 (VSC1T), GS160 / GS4 (VSB1T), Lambretta LI, LIS, SX, TV, DL, GP)

Preview: Stud -M8 x 160mm- -PIAGGIO- (used for cylinderVespa PX200, Rally180 (VSD1T), Rally200 (VSE1T), SS180 (VSC1T), GS160 / GS4 (VSB1T), Lambretta LI, LIS, SX, TV, DL, GP)

Description

Original Piaggio stud bolt (tie rod) for fixing the cylinder and cylinder head to the engine housing of all Vespa engines from 160ccm displacement. Can also be used in the engines of the Lambretta series 1-3 models. The thread of the Piaggio cylinder studs is rolled, not cut. Therefore they have a very high tensile strength and can handle much more tightening torque than the specified 22-24Nm for cylinder mounting.

Another special feature are the different core diameters of the threads. The side that is screwed into the engine housing has a slightly larger core diameter than the cylinder head side. Due to this oversize, the bolts can be screwed into the housing relatively tightly, but they always remain in the housing and do not rotate even when the cylinder head nuts are loosened.

The side that should face the cylinder head is marked with a narrow turned in circular groove. Older bolts have a grain knock on the upper side of the bolt.

Some Piaggio bolts already have a factory-applied threadlocker (usually blue). This marks the side to be screwed into the motor housing.

(US)
_{AI-translation}

+----------+
Manufacturer Information
Piaggio
Viale Rinaldo Piaggio 25
56025 Pontedera - Italy
https://www.piaggiogroup.com/
info@piaggiogroup.com/

Responsible Person for the EU
Piaggio
Viale Rinaldo Piaggio 25
56025 Pontedera - Italy
https://www.piaggiogroup.com/
info@piaggiogroup.com/

€11.20 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)

P For this item you get fidelity point/s

Studs
material:	steel
total length:	162,0mm
thread 1:	M8x1,25
length of thread 1:	22,0mm
thread 2:	M8x1,25
length of thread 2:	22,0m
length shaft:	118,0mm
diameter shaft:	7,3mm
one thread is screw in type:
quantity incl.:	1
OEM numbers (for comparison purposes only)
Piaggio	016058, 16058, S.553
Innocenti	19210013, 19010013

Customers alternatively searched for
Stehbolzen \| Gewindebolzen \| Gewindestange \| Bolzen \| Zylinderstehbolzen \| Zylinderschrauben \| Schrauben \| Zylinderbefestigung \| Festmachen \| Zuganker \| Zugbolzen \| Dehnschrauben \| Stud \| Goujon \| Prigiorniero \| Esparrago \|