Stud installation tool kit -BGM PRO- M6/M7/M8
Description
Screw the BGM Pro tool onto the stud bolt and counter with the integrated hexagon socket screw. Thereby it is braced with the thread of the stud bolt. Now turn on the outer spanner flat. The stud bolt is fixed and can be loosened or screwed in. Make sure that the lock is sufficiently tight so that the tool does not become loose.
Ideal for short studs (such as on Lambretta transmission covers).
The minimum length of stud thread required to be gripped is:
- M6 / /M7 = 6.5mm
- M8 = 9mm
Available individually or as a set.
Also available for the rare thread size M7!
Required additional tool:
- Open-ended/ring spanner: SW19
- Allen wrench: 6mm
NOTE: Please note that stud bolts glued in with screw adhesive/loctite often have a very high breakaway torque. Please try to heat the stud bolt(s) or the housing around it to loosen the adhesive connection.
AI-translation
+----------+
Manufacturer Information
bgm
Kurt-Schumacher-Straße 1
50129 Bergheim - Germany
https://www.scooter-center.com/
info@scooter-center.com
Responsible Person for the EU
Scooter Center GmbH
Kurt-Schumacher-Str. 1
50129 Bergheim-Glessen - Germany
https://www.scooter-center.com/
info@scooter-center.com
incl. VAT plus shipping costs
| General | |
|---|---|
| EAN: | 4251389106128 |
| Customers alternatively searched for | |
|---|---|
| Stehbolzenausdreher | Tool | Set | Stehbolzen | Set | Gewindebolzen | Gewindestange | Bolzen | Zylinderstehbolzen | Zylinderschrauben | Schrauben | Zylinderbefestigung | Festmachen | Zuganker | Zugbolzen | Dehnschraubencylinder | Head | Nut | Studs | Kit | M8 165 | |
Fits the following vehicles
- Universal
Blog
Ratings
Zum Einbau sehr komfortabel zu handhaben.
Zum Ausbau bei festsitzenden Stehbolzen zu schwache Konterung - normale Mutter drauf und mit dem Werkzeug gekontert - das funktioniert!
Der M6 hat beim Ausdrehen nicht lange gehalten.
Mit den anderen habe ich nur Stifte gesetzt, das hat funktioniert.
Sauber
Sehr feines helferlein
Sehr gut
