Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Spacer for clutch plates -BGM PRO- Vespa type Cosa2, PX (1995-), CR - 1,0mm - (optional needed, mounting position below circlip)

BGM8040CRSB
Spacer for clutch plates -BGM PRO- Vespa type Cosa2, PX (1995-), CR - 1,0mm - (optional needed, mounting position below circlip)
Spacer for clutch plates -BGM PRO- Vespa type Cosa2, PX (1995-), CR - 1,0mm - (optional needed, mounting position below circlip)
Spacer for clutch plates -BGM PRO- Vespa type Cosa2, PX (1995-), CR - 1,0mm - (optional needed, mounting position below circlip)

Description


If the coupling is rubbing on the cover, but the cover is already machined or turned out, it is usually due to a too thin lining package. Some manufacturers use thinner friction discs which increases the overall height of the clutch. The spacer offered here is placed under the large retaining ring to compensate the overall height and reduces the overall height again.

NOTE: Do not use to save yourself the need to rework the clutch cover. Otherwise it is possible that the separation path of the coupling becomes too small.


AI-translation

 
€8.48 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
OEM numbers (for comparison purposes only)
Piaggio 237272
Customers alternatively searched for
Kupplungsstahlscheibe | Trennscheibe | Kupplungsscheibe | Stahlscheibe | Clutch | Steel | Plate | Disque Lisse D'Embrayage | Disco In Acciaio Frizione | Disco Embrague |
If the coupling is rubbing on the cover, but the cover is already machined or turned out, it is...Continue reading

Fits the following vehicles


Ratings


19 Aug 2017

Great quality

Recently viewed items