Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Small primary gear -DRT Gear Flame Cobra 22/60 (2.72) - Vespa V50, PV125, ET3. PK50, PK80, PK125 - 22 tooth (straight)

7672978
Small primary gear -DRT Gear Flame Cobra 22/60 (2.72) - Vespa V50, PV125, ET3. PK50, PK80, PK125 - 22 tooth (straight)
Small primary gear -DRT Gear Flame Cobra 22/60 (2.72) - Vespa V50, PV125, ET3. PK50, PK80, PK125 - 22 tooth (straight)
Small primary gear -DRT Gear Flame Cobra 22/60 (2.72) - Vespa V50, PV125, ET3. PK50, PK80, PK125 - 22 tooth (straight)

Description


The DRT transmission wonderland is almost boundless, accordingly one can lose the overview also occasionally times.

The always with catchy names provided components of DRT have a very good quality, even in the hardest racing use gives up to now as good as no defective of the parts to register. This is a miracle in itself, if you consider that the original gearbox is designed for only 8-9hp at the rear wheel.

Meanwhile there are quite a few engines that have more than 40hp at the rear wheel.

DRT offers here the suitable parts and makes the life of a Vespas wrench much easier, especially because of its modular constructed gearboxes.

The Cobra primary consists of a specially manufactured clutch pinion with 60 teeth. So you can use the same clutch pinion either a long 2.61's or a short 3.16's reduction plus the possible steps in between.

For this you always had to disassemble the complete motor before because it was always necessary to exchange the complete primary.

The Cobra sprockets are available in five versions, which results in the following primary reduction ratios with the 60 tooth Cobra clutch pinion:

  • 19 teeth (3.16)
  • 20 teeth (3.00)
  • 21 teeth (2.86)
  • 22 teeth (2.72)
  • 23 teeth (2nd gear)61)

For a better estimation of the gear ratio length, here is an example of the primary reduction ratios of some original Vespa engines:

  • V50 Special (4,25)
  • PK 50 XL (4,00)
  • V90/PK80 (2,86)
  • 125PV (2,54)

Due to the much higher speed level of a tuned engine it is often useful to use a shorter reduction ratio than the original one used for a similar displacement. Just because an engine has more power does not mean that it can 'pull' a longer gear ratio.

The pinion offered here has 22 teeth and can only be used with the COBRA clutch pinion available with the SEPARAT!


AI-translation

 
This item is currently not available.
€70.00 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon
P For this item you get fidelity point/s
Gear box (classic scooters)
number of teeth small primay sprocket: 22
type of teeth: straight
combinable primary sprockets: 60 teeth straight
Please inform me once the product is available again.
Customers alternatively searched for
Primärrad | Antriebsrad | Antriebsritzel | Getriebezahnrad | Vorgelegezahnrad | Vorgelegerad | Primärzahnrad | Primäres | Rad | Übersetzung | Primäre | Untersetzung | Getriebe | Topspeed | Endgeschwindigkeit | Höhere | Primary | Drive | Wheel | Pignon Primaire | Pignone | Piñón Transmisión Primaria |
Recently viewed items