Set for conversion to wide tyre -SCOOTER & SERVICE CNC 3 inch for tyre size 110/80-10- Vespa PX, T5 125cc, Cosa, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), GL150 (VLA1T)

Description

This kit is based on a cnc manufactured truss spacer made of high strength aluminium.
HANDMADE: This product is a Scooter&Service - proprietary development.
The kit contains the cnc manufactured truss spacer and the necessary screws and small parts. Rim halves, tube and tire are not included.

A 110/80-10 tire reaches its intended contour and full width only from the standard rim width of 3 inches. The engine should of course be offset as with any wide tire kit to compensate for the track offset - for this purpose the engine crossbeam must be shortened by 8mm on the cylinder side. The enclosed cross beam distance assumes an offset of 8mm and is mounted on the clutch side between chassis and engine.
_{AI-translation}