Reed valve -MALOSSI MHR Replica- Piaggio 50-180cc - carbon fibre | Reed valves | Carburettor | Engines

Preview: Reed valve -MALOSSI MHR Replica- Piaggio 50-180cc - carbon fibre

Description

The MHR Racing Diaphragm Blocks offer you a larger inlet area and an optimized flow pattern. This means there is no throttle in the inlet and the cylinder charge increases. This also increases the performance. There you see: Developed for the racing engines of the Malossi Werksracer and successfully tested on the race track.
The diaphragm brings performance and reliability. Thanks to the very high quality selected materials: The housing is made of a FKM-coated aluminium- silicon alloy. Thanks to the vulcanized surface, an optimal sealing of the platelets is guaranteed. So even with really big carburettors there is no pressure reduction in the crankcase.
_{AI-translation}

€59.50 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)

P For this item you get fidelity point/s

Reed valves
design:	V-type
material reed valve body:	Aluminium
reed valve body rubber coated:	yes
number of screw holes:	2
hole pitch:	52mm
outer dimension flange:	53 x 40mm
inner dimension flange:	29,5 x 29,5mm
thickness flange:	4,0mm
insertion depth:	38,0mm
reed stop:	yes
number of petals:	4
reed valve stuffer incl.:	yes
gasket incl.:	no
spacer incl.:	no
replacement reed petals incl.:	no
Reed petals
material:	Carbon
number of screws for each petal:	2
thickness of petals 1:	0.1 mm
OEM numbers (for comparison purposes only)
Malossi	M277708.C0, 277708.C0

Customers alternatively searched for
277708.C0 \| M277708.C0 \| Membranblock \| Membranen \| Membran \| Flatterventil \| Membrankörper \| Membrankorpus \| Einlaßmembran \| Reed \| Valve \| Boite À Clapets \| Pacco Lamellare \| Toma De Admisión Por Láminas \|