Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Rear brake cable, inner -BGM ORIGINAL Ø=2.9mm x 1050mm with threaded end M6- Lambretta (Serie 1-3) LI, LIS, SX, TV, GP, DL (also suitable for Vespa Largeframe (1958-1977) with T5 brake lever)

BGM8081
Rear brake cable, inner -BGM ORIGINAL Ø=2.9mm x 1050mm with threaded end M6- Lambretta (Serie 1-3) LI, LIS, SX, TV, GP, DL (also suitable for Vespa Largeframe (1958-1977) with T5 brake lever)
Rear brake cable, inner -BGM ORIGINAL Ø=2.9mm x 1050mm with threaded end M6- Lambretta (Serie 1-3) LI, LIS, SX, TV, GP, DL (also suitable for Vespa Largeframe (1958-1977) with T5 brake lever)
Rear brake cable, inner -BGM ORIGINAL Ø=2.9mm x 1050mm with threaded end M6- Lambretta (Serie 1-3) LI, LIS, SX, TV, GP, DL (also suitable for Vespa Largeframe (1958-1977) with T5 brake lever)
Rear brake cable, inner -BGM ORIGINAL Ø=2.9mm x 1050mm with threaded end M6- Lambretta (Serie 1-3) LI, LIS, SX, TV, GP, DL (also suitable for Vespa Largeframe (1958-1977) with T5 brake lever)
Rear brake cable, inner -BGM ORIGINAL Ø=2.9mm x 1050mm with threaded end M6- Lambretta (Serie 1-3) LI, LIS, SX, TV, GP, DL (also suitable for Vespa Largeframe (1958-1977) with T5 brake lever)

Description


The BGM PRO inner cable for the rear brake Lambretta (series 1-3) has a cast-on threaded part.

BENEFITS

  • The rear brake cable is now one-piece, the original clamp screw connection is no longer needed
  • The motor can be removed from the frame much faster
  • The brake cable remains permanently ready for use because it is no longer squeezed
  • Like the original adjuster, it has an anti-twist device (thread flattened on one side)
  • Tinned end, never again a spliced-on cable end

It is the 1st brake cable to be removed:1 replacement for the original rear inner cable on all Lambretta Series 1-3 models. Parts of the original adjuster are taken over (knurled nut, abutment).

FAZIT: Simple but very clever solution that should not be missing on any Lambretta!

TIP: Also fits on all Vespa largeframe vehicles that have a brake pedal with cable clamp (e.g.Vespa Rally180 (VSD1T), Rally200 (VSE1T), Sprint (VLB1T), GT/GTR (VNL2T), TS125 (VNL3T), VNA, VNB, VBA, VBB, VNC, VBC etc.) and whose motor is/is to be equipped with a brake arm of the T5 models.

(US050419)


AI-translation



+----------+
Manufacturer Information
bgm
Kurt-Schumacher-Straße 1
50129 Bergheim - Germany
https://www.scooter-center.com/
info@scooter-center.com

Responsible Person for the EU
Scooter Center GmbH
Kurt-Schumacher-Str. 1
50129 Bergheim-Glessen - Germany
https://www.scooter-center.com/
info@scooter-center.com
 
€7.90 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Colour
main colour: silver
Transmission cables
calbe type: inner
inner cable type: laid
diameter inner cable: 2.5 mm
outer cable Teflon ® coated:
length inner cable: 114 cm
dimensions upper terminal: M6 x 1,0
dimensions lower terminal: offen
Customers alternatively searched for
Bremszug | Bremskabel | Bremsseil | Hinten | Innen | Hülle | Bremse | Rear | Brake | Cable | Inner | Cable De Frein Arrière | Cavo Trasmissione Posteriore | Cable De Freno Rueda Trasera |
The BGM PRO inner cable for the rear brake Lambretta (series 1-3) has a cast-on threaded part....Continue reading

Fits the following vehicles


Ratings


22 Jan 2018

Super produit

20 May 2016

Tut was es soll.

17 Aug 2015

Funktioniert tadellos

Recently viewed items