Write a review
Evaluations will be activated after verification.
Item successfully added.
Crankshaft -BGM Pro HPC Competition 58mm stroke, 115mm conrod- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc
Part no.:
BGM11558N
Description
When good things get even better, the bgm PRO Lambretta waves are now the bgm PRO Competition waves. The features that have proven themselves have remained, important technical details have been further improved.
The bgm PRO Competition shafts incorporate a total of 15 years of experience. Three more years of development work and tests have been carried out in the optimisation phase to create a shaft that offers maximum torsional resistance and stability.
In the English BSSO racing series, Team Replay has started the 2018 season with several bgm parts. Among others with the new and revised bgm crankshaft. Replay's rider Darren Conneely finished second in group 4.
AI-translation
- B>Enhanced features are:
- Ground pressing surfaces for maximum stability of the joint and thus the highest possible torsional resistance
- Ground and coated crank pin
- Forged connecting rod with CNC finishing
- Hardened and ground bearing and oil seal seats
- Wider choice of stroke and connecting rod combinations than before
- Quality assurance of each individual crankshaft through 100% testing by ISO and QC certified manufacturer
- Full cheek shaft for increased pre-compression
- Forged crank webs
- Low-vibration engine running thanks to sophisticated balancing with hidden pockets, copper and tungsten counterweights
- Lubrication of the lower connecting rod bearing via two large lubrication slots
- Diameter of the crank pin 22 mm
The bgm PRO Competition shafts incorporate a total of 15 years of experience. Three more years of development work and tests have been carried out in the optimisation phase to create a shaft that offers maximum torsional resistance and stability.
In the English BSSO racing series, Team Replay has started the 2018 season with several bgm parts. Among others with the new and revised bgm crankshaft. Replay's rider Darren Conneely finished second in group 4.
AI-translation
€290.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Bearings | |
|---|---|
| sizes: | 16x20x20mm |
| Gudgeon pins | |
| diameter: | 16 mm |
| Crankshafts | |
| stroke: | 58 mm |
| thread rotor side: | M12x1,0 left-hand thread |
| thread drive side: | M8x1,0 right-hand thread |
| diameter crankwebs: | 95.9 mm |
| width crankwebs: | 40.5 mm |
| diameter bearing seat rotor side: | 25 mm |
| diameter bearing seat drive side: | 25 mm |
| diameter oil seal seat rotor side: | 33 mm |
| diameter oil seal seat drive side: | 33 mm |
| full circle crankshaft: | |
| filling material for full circle: | steel |
| material balancing weights: | copper, tungsten |
| rotary valve crankshaft: | |
| crankcase has to be milled: | |
| engine casing has to be modified: | |
| Connecting rods | |
| length connecting rod: | 115 mm |
| thickness connecting rod: | 7 mm |
| diameter small end connecting rod eye: | 20 mm |
| lubricating hole at small end bearing: | yes |
| diameter crankpin: | 22 mm |
| lubricating hole at crankpin bearing: | slot |
| crankpin bearing: | silver cage bearing |
| crankpin shims: | yes |
| Customers alternatively searched for | |
|---|---|
| Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | crankshaft | crank | Albero Motore | |
When good things get even better, the bgm PRO Lambretta waves are now the bgm PRO Competition...Continue reading
Fits the following vehicles
- Lambretta (Eibar) LI 125 (series 2)
- Lambretta (Eibar) LI 150 (series 2)
- Lambretta (Eibar) TV 175 (series 2)
- Lambretta (Innocenti) LI 125 (series 1)
- Lambretta (Innocenti) LI 150 (series 1)
- Lambretta (Innocenti) LI 125 (series 2)
- Lambretta (Innocenti) LI 150 (series 2)
- Lambretta (Innocenti) TV 175 (series 2)
- Lambretta (Innocenti) GP 125 (DL 125)
- Lambretta (Innocenti) GP 150 (DL 150)
- Lambretta (Innocenti) GP 200 (DL 200)
- Lambretta (Innocenti) LI 125 (series 3)
- Lambretta (Innocenti) LI 150 (series 3)
- Lambretta (Innocenti) LI 125 Special (LIS 125)
- Lambretta (Innocenti) LI 150 Special (LIS 150)
- Lambretta (Innocenti) SX 150 (X 150 Special)
- Lambretta (Innocenti) SX 200 (X 200 Special)
- Lambretta (Innocenti) TV 175 (series 3)
- Lambretta (Innocenti) TV 200 (GT 200)
- Lambretta (Serveta) Jet 200
- Lambretta (Serveta) Lince 125
- Lambretta (Serveta) Lince 150
- Lambretta (Serveta) Lince 200
- Lambretta (Serveta) Special 125
- Lambretta (Serveta) Special 150
- Lambretta (Serveta) Scooterlinea 125
- Lambretta (Serveta) Scooterlinea 150
- Lambretta (Serveta) Scooterlinea 175
- Lambretta (Serveta) Scooterlinea 200
- Lambretta (SIL) GP 125
- Lambretta (SIL) GP 150
- Lambretta (SIL) GP 200
Blog
Related items
bgm Original
BGM1122
Bearing and oil seal set for crankshaft -BGM ORIGINAL FKM- Lambretta DL, GP
BGM1122
The item is ordered and will be in stock soon
€69.90
*
*incl. VAT plus shipping costs
Trisco
MN911B
Ignition Timing Strobe Light Lamp -TRISCO (Prolite, Double-D) (D-Cell type)- Inductive Pick Up 6V / 12 Volt - Xenon Timing Light
MN911B
The item is ordered and will be in stock soon
€55.89
*
*incl. VAT plus shipping costs
Alternative items
bgm Pro
BGM11658N
Crankshaft -BGM Pro HPC Competition 58mm stroke, 116mm conrod- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc for Quattrini M210
BGM11658N
The item is ordered and will be in stock soon
€290.00
*
*incl. VAT plus shipping costs
bgm Pro
BGM11660N
Crankshaft -BGM Pro HPC Competition 60mm stroke, 116mm conrod- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc
BGM11660N
The item is ordered and will be in stock soon
€290.00
*
*incl. VAT plus shipping costs
Ersatzteile
Recently viewed items