Write a review
Evaluations will be activated after verification.
Item successfully added.
Piston -VESPA piston with deflector- Vespa 150 VL1T, VL2T, VL3T, VB1T - 57.2mm
Part no.:
GL1091
Description
Pistons - VESPA Nose piston- Vespa 150cc VL1T, VL2T, VL3T, VB1T
Replacement piston for the 150cc cylinders of Vespa models VL1T, VL2T, VL3T, VB1T - 57.2mm is the 1st oversize. Nose pistons are used in cross-flow scavenged two-stroke engines to keep the fresh gas flow away from the open exhaust. The nose sits on the piston crown and deflects the gas flow upward. The inlet cross-section can be larger than in cross-flow scavenged engines with flat pistons. Nose pistons also cannot prevent fresh gas from escaping into the exhaust at all loads and speeds, and they cause an unfavorable combustion chamber shape. After reverse scavenging was developed in the 1920s, cross scavenged engines became less important.
(TW180122)
+----------+
Manufacturer Information
GOL
Via Clusone 6
20135 Mailand - Italy
https://www.pistonigol.com/
info@pec.pistonigol.com
Responsible Person for the EU
GOL
Via Clusone 6
20135 Mailand - Italy
https://www.pistonigol.com/
info@pec.pistonigol.com
€64.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Gudgeon pins | |
|---|---|
| diameter: | 15 mm |
| Cylinders | |
| bore: | 57.2 mm |
| engine type: | 2-stroke |
| Pistons | |
| number of piston rings: | 2 |
| production method piston: | cast |
| peg position: | off-centre |
| compression hight: | 30 mm |
| Piston rings | |
| piston ring type: | common ring |
| thickness rings: | 2,5mm |
| Circlips | |
| circlip type: | Seeger-type |
| Customers alternatively searched for | |
|---|---|
| Kolben | Zylinderkolben | Piston | Pistone | |
Available versions
Related items
Recently viewed items