Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Oil seal set for crankshaft -MALOSSI PTFE/FKM- Piaggio 50 cc 2-stroke

7675873
Oil seal set for crankshaft -MALOSSI PTFE/FKM- Piaggio 50 cc 2-stroke
Oil seal set for crankshaft -MALOSSI PTFE/FKM- Piaggio 50 cc 2-stroke
Oil seal set for crankshaft -MALOSSI PTFE/FKM- Piaggio 50 cc 2-stroke

Description


Malossi uses the best materials for its shaft seals. They consist of steel cores covered with fluorinated rubber (FKM/FPM). The inner running surface, which has direct contact with the sealing surface of the crankshaft, is made of PTFE (polytetrafluoroethylene). Both materials are known under the trade names FKM and Teflon of the manufacturer DuPont. PTFE is extremely resistant to all acids, oils, greases, alcohols and fuels. Due to the increased alcohol content in today's fuel, shaft sealing rings with this material are recommended. In addition to their enormous wear resistance, they run with low friction, which makes them a must for all engines with higher speeds. Piaggio uses PTFE rings as standard in 125-180cc two-stroke engines such as the Runner or SKR. Also in the PX engines, the clutch side large shaft seal of the crankshaft is made of such a material (brown sealing lip).

  • Very low wear
  • Absolutely heat resistant
  • Extremely low frictional resistance
  • Resistant to almost all chemicals
  • Perfectly suitable for heavily tuned engines
  • Also applicable in the series engine

AI-translation

 
€16.85 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Oil seal sets
number of oil seals supplied: 2
size oil seal 1: 19x30x6,5mm
material oil seal 1: FPM, FKM
coating oil seal 1: PTFE
size oil seal 2: 18x28x7/7,5mm
material oil seal 2: FPM, FKM
coating oil seal 2: PTFE
OEM numbers (for comparison purposes only)
Malossi 6618157, M6618157
Customers alternatively searched for
6615256 | M6615256 | Wellendichtringsatz | Kurbelwelle | Simmerringsatz | Dichtringsatz | Wellendichtringe | Simmerring | Dichtring | Dichtung | Simmering | Wedi | Wellendichtung | Oil | Seal | Set | Crankshaft | Pochette Joints Spi | Kit Parolio Per Albero Motore | Kit Retenes Cigüeñal | Bourrage |
Malossi uses the best materials for its shaft seals. They consist of steel cores covered with...Continue reading

Fits the following vehicles


Ratings


26 Apr 2016

Super

Alternative items


Oil seal set engine -BGM PRO, FKM (E10/etahnol resistant)- Piaggio 50 cc AC/LC (since 1998)
bgm Pro
BGM1145
bgm Pro
Oil seal set engine -BGM PRO, FKM (E10/etahnol resistant)- Piaggio 50 cc AC/LC (since 1998)
Available immediately (delivery time 1-3 working days*)
€18.90 *
*incl. VAT plus shipping costs
Recently viewed items