Write a review
Evaluations will be activated after verification.
Item successfully added.
Oil seal set engine -MALOSSI PTFE/FKM- Piaggio 50 cc AC/LC (since 1998, type HiPer 2)
Part no.:
7675879
Description
Malossi uses the best materials for its shaft seals. They consist of steel cores covered with fluorinated rubber (FKM/FPM). The inner running surface, which has direct contact with the sealing surface of the crankshaft, is made of PTFE (polytetrafluoroethylene). Both materials are known under the trade names FKM and Teflon of the manufacturer DuPont. PTFE is extremely resistant to all acids, oils, greases, alcohols and fuels. Due to the increased alcohol content in today's fuel, shaft sealing rings with this material are recommended. In addition to their enormous wear resistance, they run with low friction, which makes them a must for all engines with higher speeds. Piaggio uses PTFE rings as standard in 125-180cc two-stroke engines such as the Runner or SKR. Also in the PX engines, the clutch side large shaft seal of the crankshaft is made of such a material (brown sealing lip).
AI-translation
+----------+
Manufacturer Information
Malossi
Via Roma 118
40012 Calderara di Reno - Italy
https://www.malossi.com/
info@malossi.com
Responsible Person for the EU
Malossi
Via Roma 118
40012 Calderara di Reno - Italy
https://www.malossi.com/
info@malossi.com
- Very low wear
- Absolutely heat resistant
- Extremely low frictional resistance
- Resistant to almost all chemicals
- Perfectly suitable for heavily tuned engines
- Also applicable in the series engine
AI-translation
+----------+
Manufacturer Information
Malossi
Via Roma 118
40012 Calderara di Reno - Italy
https://www.malossi.com/
info@malossi.com
Responsible Person for the EU
Malossi
Via Roma 118
40012 Calderara di Reno - Italy
https://www.malossi.com/
info@malossi.com
€28.50 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Oil seal sets | |
|---|---|
| number of oil seals supplied: | 4 |
| size oil seal 1: | 30x47x6mm |
| material oil seal 1: | FPM, FKM |
| coating oil seal 1: | PTFE |
| size oil seal 2: | 17x28x5mm |
| material oil seal 2: | FPM, FKM |
| coating oil seal 2: | PTFE |
| size oil seal 3: | 19x30x6,5x5mm |
| material oil seal 3: | FPM, FKM |
| coating oil seal 3: | PTFE |
| size oil seal 4: | 13x28x7/7,5mm |
| material oil seal 4: | FPM, FKM |
| coating oil seal 4: | PTFE |
| OEM numbers (for comparison purposes only) | |
| Malossi | 6618160, M6618160 |
| Customers alternatively searched for | |
|---|---|
| 6615749 | M6615749 | Wellendichtringsatz | Simmerringsatz | Dichtringsatz | Wellendichtringe | Simmerring | Dichtring | Dichtung | Simmering | Wedi | Wellendichtung | Oil | Seal | Set | Pochette Joints Spi | Kit Paraoli | Kit Retenes | Bourrage | | |
Recently viewed items