Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Oil seal 31x62,1x5,8/3,5mm -BGM PRO FKM (E10/etahnol resistant) metal, brown (extra flat oil seal for crankshaft drive side Vespa PX (from 1984), T5 125cc, Cosa)

BGM1034M
Oil seal 31x62,1x5,8/3,5mm -BGM PRO FKM (E10/etahnol resistant) metal, brown (extra flat oil seal for crankshaft drive side Vespa PX (from 1984), T5 125cc, Cosa)
Oil seal 31x62,1x5,8/3,5mm -BGM PRO FKM (E10/etahnol resistant) metal, brown (extra flat oil seal for crankshaft drive side Vespa PX (from 1984), T5 125cc, Cosa)
Oil seal 31x62,1x5,8/3,5mm -BGM PRO FKM (E10/etahnol resistant) metal, brown (extra flat oil seal for crankshaft drive side Vespa PX (from 1984), T5 125cc, Cosa)
Oil seal 31x62,1x5,8/3,5mm -BGM PRO FKM (E10/etahnol resistant) metal, brown (extra flat oil seal for crankshaft drive side Vespa PX (from 1984), T5 125cc, Cosa)

Description


BGM PRO oil seal crankshaft PX (type extra flat with 3.5mm) made of high quality and ethanol resistant (E10) FKM*.

EXTRA FLAT VERSION (31x62.1x5.8/3.5mm)
The shaft seal on the clutch side in its normal height (4.3mm) is a bit too high for many engine cases (e.g. Malossi).
Depending on the tolerances, as well as a possible spacer of the bearing, a shaft seal of conventional height can rest on the bearing inner ring.
Experienced mechanics have so far solved this problem by grinding down the oil seal.
The BGM shaft seal is a simple and practical solution.
With the reduced height (3.5mm instead of 4.3mm) they offer 100% sufficient distance to the bearing in every engine.
They are therefore compatible and applicable to any engine design.




WHY FKM
The material FKM (fluorocarbon rubber) is extremely resistant to heat, friction and fuel/ethanol.
In Germany, current premium fuel already contains up to 5% ethanol admixture per se. In other countries, the ethanol/alcohol content is significantly higher.
Conventional shaft seals can swell or soften on contact with ethanol-containing fuels. BGM PRO FKM shaft seals, on the other hand, offer perfect protection.
In addition, FKM is twice as temperature resistant as conventional (blue) NBR shaft seals, has very good gas impermeability and is also very resistant to aging.


WHAT IT IS SUITABLE FOR
An engine equipped with BGM PRO FKM shaft seals can therefore also be operated with E10 fuel (10% alcohol content) without any problems.
The high-quality brown FKM®* sealing material is permanently resistant to alcohol and is also suitable for engines with high temperature loads and high speeds.
BGM PRO FKM shaft seals are therefore suitable for all engines, whether original or tuned high-performance engine.


ADVANTAGES BGM PRO
The BGM PRO oil seals offer a double sealing as an additional feature. All oil seals that seal to the atmosphere have a so-called dust lip. This is positioned in front of the actual sealing lip and keeps dust, dirt and moisture out. This further increases the very good stability.

AVAILABLE
The BGM PRO FKM oil seals are available individually as well as in sets for almost all Vespa and Lambretta engines.

*FKM® is a registered trademark of DuPont Dow Elastomers

AI-translation

 
€11.90 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
OEM numbers (for comparison purposes only)
Piaggio 242550
Customers alternatively searched for
Wellendichtring | 31 | 62 | 1 | 5 | 8 | 4 | 3 | Simmerring | Dichtring | Dichtung | Wedi | Wellendichtung | Oil | Seal | 31 | 62 | 1 | 5 | 8 | 4 | 3 | Joint Spi 31X62 | 1X5 | 8 4 | 3mm | Paraolio 31X62 | 1X5 | 8 4 | 3mm | Retén 31X62 | 1X5 | 8 4 | 3mm | Bourrage |
BGM PRO oil seal crankshaft PX (type extra flat with 3.5mm) made of high quality and ethanol...Continue reading

Fits the following vehicles


Recently viewed items