Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Oil seal 27x37x7mm -MALOSSI PTFE/FKM- (used for rear hub Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL, PK XL2, ETS, GT125, GTR125, Sprint, TS, GL150, VBA, VBB, VNA, VNB, Rally180

7675883
Oil seal 27x37x7mm -MALOSSI PTFE/FKM- (used for rear hub Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL, PK XL2, ETS, GT125, GTR125, Sprint, TS, GL150, VBA, VBB, VNA, VNB, Rally180
Oil seal 27x37x7mm -MALOSSI PTFE/FKM- (used for rear hub Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL, PK XL2, ETS, GT125, GTR125, Sprint, TS, GL150, VBA, VBB, VNA, VNB, Rally180
Oil seal 27x37x7mm -MALOSSI PTFE/FKM- (used for rear hub Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL, PK XL2, ETS, GT125, GTR125, Sprint, TS, GL150, VBA, VBB, VNA, VNB, Rally180

Description


Malossi uses the best materials for its shaft seals. They consist of steel cores covered with fluorinated rubber (FKM/FPM). The inner running surface, which has direct contact with the sealing surface of the crankshaft, is made of PTFE (polytetrafluoroethylene). Both materials are known under the trade names FKM and Teflon of the manufacturer DuPont. PTFE is extremely resistant to all acids, oils, greases, alcohols and fuels. Due to the increased alcohol content in today's fuel, shaft sealing rings with this material are recommended. In addition to their enormous wear resistance, they run with low friction, which makes them a must for all engines with higher speeds. Piaggio uses PTFE rings as standard in 125-180cc two-stroke engines such as the Runner or SKR. Also in the PX engines, the clutch side large shaft seal of the crankshaft is made of such a material (brown sealing lip).

  • Very low wear
  • Absolutely heat resistant
  • Extremely low frictional resistance
  • Resistant to almost all chemicals
  • Perfectly suitable for heavily tuned engines
  • Also applicable in the series engine

AI-translation

 
€11.95 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Oil seals
inner diameter: 27
outer diameter: 3
width: 7
sizes: 27x37x7
material: FPM, FKM
coating: PTFE
OEM numbers (for comparison purposes only)
Malossi M6617438B, 6617438B
Piaggio 046699, 46699, 3/46699
Customers alternatively searched for
6615305B | 6617438B | M6615305B | 6617438B | Wellendichtring | 27 | 37 | 7 | Simmerring | Dichtring | Dichtung | Wedi | Wellendichtung | Oil | Seal | 27 | 37 | 7 | Joint Spi 27X37X7mm | Paraolio 27X37X7mm | Retén 27X37X7mm | Bourrage |
Malossi uses the best materials for its shaft seals. They consist of steel cores covered with...Continue reading

Ratings


6 Jan 2016

Sehr gut

Recently viewed items