Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Oil seal 22x32x5,5mm -BGM PRO FKM (E10/etahnol resistant)- (used for kickstarter shaft Lambretta LI, LIS, SX, TV (series 2-3), DL, GP - rear hub Minarelli 50 cc (type MA, MY, CW, CA, CY))

BGM1045
Oil seal 22x32x5,5mm -BGM PRO FKM (E10/etahnol resistant)- (used for kickstarter shaft Lambretta LI, LIS, SX, TV (series 2-3), DL, GP - rear hub Minarelli 50 cc (type MA, MY, CW, CA, CY))
Oil seal 22x32x5,5mm -BGM PRO FKM (E10/etahnol resistant)- (used for kickstarter shaft Lambretta LI, LIS, SX, TV (series 2-3), DL, GP - rear hub Minarelli 50 cc (type MA, MY, CW, CA, CY))
Oil seal 22x32x5,5mm -BGM PRO FKM (E10/etahnol resistant)- (used for kickstarter shaft Lambretta LI, LIS, SX, TV (series 2-3), DL, GP - rear hub Minarelli 50 cc (type MA, MY, CW, CA, CY))
Oil seal 22x32x5,5mm -BGM PRO FKM (E10/etahnol resistant)- (used for kickstarter shaft Lambretta LI, LIS, SX, TV (series 2-3), DL, GP - rear hub Minarelli 50 cc (type MA, MY, CW, CA, CY))
Oil seal 22x32x5,5mm -BGM PRO FKM (E10/etahnol resistant)- (used for kickstarter shaft Lambretta LI, LIS, SX, TV (series 2-3), DL, GP - rear hub Minarelli 50 cc (type MA, MY, CW, CA, CY))

Description


BGM PRO shaft sealing rings made of high-quality and ethanol-resistant (E10) FKM*

WHY FKM
The material FKM (fluorocarbon rubber) is extremely resistant to heat, friction and fuel/ethanol.
Current super fuel in Germany already contains up to 5% ethanol per se. In other countries the ethanol/alcohol content is significantly higher.
Conventional shaft seals can swell or soften on contact with fuels containing ethanol. The BGM PRO FKM rotary shaft seals offer perfect protection against this.
In addition, FKM is twice as temperature resistant as conventional (blue) NBR shaft seals, has very good gas impermeability and is also very resistant to ageing.


FIT FO
R
A motor equipped with BGM PRO FKM shaft seals can therefore also be operated with E10 fuel (10% alcohol content) without any problems.
The high-quality brown FKM®* sealing material is permanently resistant to alcohol and is also suitable for engines with high temperature loads and high speeds.
BGM PRO FKM shaft seals are therefore suitable for all engines, whether original or tuned high-performance engines.


ADVANTAGES BGM PRO
The BGM PRO shaft sealing rings offer double sealing as an additional feature. All shaft sealing rings that seal to the atmosphere have a so-called dust lip. This is positioned before the actual sealing lip and keeps dust, dirt and moisture away. This further increases the very good stability.

AVAILABLE
The BGM PRO FKM oil seals are available individually as well as in sets for almost all Vespa and Lambrettas engines.

*FKM® is a registered trademark of DuPont Dow Elastomers

AI-translation



+----------+
Manufacturer Information
bgm
Kurt-Schumacher-Straße 1
50129 Bergheim - Germany
https://www.scooter-center.com/
info@scooter-center.com

Responsible Person for the EU
Scooter Center GmbH
Kurt-Schumacher-Str. 1
50129 Bergheim-Glessen - Germany
https://www.scooter-center.com/
info@scooter-center.com
 
€8.90 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
OEM numbers (for comparison purposes only)
Innocenti 19010016
Customers alternatively searched for
Wellendichtring | 22 | 32 | 5 | 5 | Simmerring | Dichtring | Dichtung | Wedi | Wellendichtung | Oil | Seal | 22 | 32 | 5 | 5 | Joint Spi 22X32X5 | 5mm | Paraolio 22X32X5 | 5mm | Retén 22X32X5 | 5mm | Bourrage |
BGM PRO shaft sealing rings made of high-quality and ethanol-resistant (E10) FKM* WHY FKM...Continue reading

Fits the following vehicles


Recently viewed items