Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Oil seal 18x28x7mm -MALOSSI PTFE/FKM- (used for crankshaft flywheel side Piaggio 50 cc 2-stroke, Piaggio 125 cc 4-stroke (1st generation))

7675889
Oil seal 18x28x7mm -MALOSSI PTFE/FKM- (used for crankshaft flywheel side Piaggio 50 cc 2-stroke, Piaggio 125 cc 4-stroke (1st generation))
Oil seal 18x28x7mm -MALOSSI PTFE/FKM- (used for crankshaft flywheel side Piaggio 50 cc 2-stroke, Piaggio 125 cc 4-stroke (1st generation))

Description


Malossi uses the best materials for its shaft seals. They consist of steel cores covered with fluorinated rubber (FKM/FPM). The inner running surface, which has direct contact with the sealing surface of the crankshaft, is made of PTFE (polytetrafluoroethylene). Both materials are known under the trade names FKM and Teflon of the manufacturer DuPont. PTFE is extremely resistant to all acids, oils, greases, alcohols and fuels. Due to the increased alcohol content in today's fuel, shaft sealing rings with this material are recommended. In addition to their enormous wear resistance, they run with low friction, which makes them a must for all engines with higher speeds. Piaggio uses PTFE rings as standard in 125-180cc two-stroke engines such as the Runner or SKR. Also in the PX engines, the clutch side large shaft seal of the crankshaft is made of such a material (brown sealing lip).

  • Very low wear
  • Absolutely heat resistant
  • Extremely low frictional resistance
  • Resistant to almost all chemicals
  • Perfectly suitable for heavily tuned engines
  • Also applicable in the series engine

AI-translation

 
€12.45 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Oil seals
inner diameter: 18
outer diameter: 28
width: 7
sizes: 18x28x7
material: FPM, FKM
coating: PTFE
OEM numbers (for comparison purposes only)
Malossi 669599B, M669599B
Piaggio 482315, 286359
Customers alternatively searched for
6614879B | M6614879B | Wellendichtring | 18 | 28 | 7 | Simmerring | Dichtring | Dichtung | Wedi | Wellendichtung | Oil | Seal | 18 | 28 | 7 | Joint Spi 18X28X7mm | Paraolio 18X28X7mm | Retén 18X28X7mm | Bourrage |
Malossi uses the best materials for its shaft seals. They consist of steel cores covered with...Continue reading

In exploded views


Fits the following vehicles


Recently viewed items