Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Oil seal 18x28x7mm -BGM PRO FKM (E10/etahnol resistant)- (used for crankshaft flywheel side Piaggio 50 cc 2-stroke, Piaggio 125 cc 4-stroke (1st generation))

BGM1005
Oil seal 18x28x7mm -BGM PRO FKM (E10/etahnol resistant)- (used for crankshaft flywheel side Piaggio 50 cc 2-stroke, Piaggio 125 cc 4-stroke (1st generation))
Oil seal 18x28x7mm -BGM PRO FKM (E10/etahnol resistant)- (used for crankshaft flywheel side Piaggio 50 cc 2-stroke, Piaggio 125 cc 4-stroke (1st generation))
Oil seal 18x28x7mm -BGM PRO FKM (E10/etahnol resistant)- (used for crankshaft flywheel side Piaggio 50 cc 2-stroke, Piaggio 125 cc 4-stroke (1st generation))

Description


BGM PRO shaft sealing rings made of high-quality and ethanol-resistant (E10) FKM*

WHY FKM
The material FKM (fluorocarbon rubber) is extremely resistant to heat, friction and fuel/ethanol.
Current super fuel in Germany already contains up to 5% ethanol per se. In other countries the ethanol/alcohol content is significantly higher.
Conventional shaft seals can swell or soften on contact with fuels containing ethanol. The BGM PRO FKM rotary shaft seals offer perfect protection against this.
In addition, FKM is twice as temperature resistant as conventional (blue) NBR shaft seals, has very good gas impermeability and is also very resistant to ageing.


FIT
FOR
A motor equipped with BGM PRO FKM shaft seals can therefore also be used without any problems in motors that run on E10 fuel (10% alcohol content).
The high-quality brown FKM®* sealing material is permanently resistant to alcohol and is also suitable for engines with high temperature loads and high speeds.
BGM PRO FKM shaft seals are therefore suitable for all engines, whether original or tuned high-performance engines.
For reasons of environmental protection and in favour of a maximum flexibility of the sealing lip, we deliberately do not apply any additional PTFE/Teflon®* to the sealing lip.


ADVANTAGES BGM PRO
The BGM PRO shaft sealing rings offer double sealing as an additional feature. All rotary shaft seals that seal against the atmosphere have a so-called dust lip. This is positioned before the actual sealing lip and keeps dust, dirt and moisture away. This further increases the already good stability.

AVAILABLE
The BGM PRO FKM oil seals are available individually as well as in sets for almost all Vespa and Lambrettas engines.

*FKM®/Teflon® are registered trademarks of DuPont Dow Elastomers

AI-translation

 
€10.50 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
OEM numbers (for comparison purposes only)
Piaggio 482315, 286359
Customers alternatively searched for
Wellendichtring | 18 | 28 | 7 | Simmerring | Dichtring | Dichtung | Wedi | Wellendichtung | Oil | Seal | 18 | 28 | 7 | Joint Spi 18X28X7mm | Paraolio 18X28X7mm | Retén 18X28X7mm | Bourrage |
BGM PRO shaft sealing rings made of high-quality and ethanol-resistant (E10) FKM* WHY FKM...Continue reading

Fits the following vehicles


Alternative items


Recently viewed items