Write a review
Evaluations will be activated after verification.
Item successfully added.
Modelling plastic -WEICON Repair Stick plastic- 115g
Part no.:
WE1005
Description
The uncomplicated solution for all repair and maintenance work.
Easy to use: Cut - knead - process.
Easy to portion even for small repairs.
WEICON Repair Sticks are temperature resistant from -50°C to +120°C (short-term up to +150°C). They are resistant to alcohol, ester, salt water, oils and most alkalis and diluted acids. They contain no solvents and cure practically without shrinkage.
The cured material can be mechanically processed (drilled, filed, milled) and overpainted without pretreatment.
WEICON Repair Sticks adhere to:
The Stick Plastic is specially designed for durable, residual elastic repairs of plastic parts* and fibre composites (GFRP, CFRP, fibreglass) and bonding of metal parts on pipes and pipe bends, for fittings and flanges, water tanks, window and door frames, pumps and housings as well as on cladding and bumpers.
* except plastics such as PE, PP, PTFE, etc.
AI-translation
+----------+
Manufacturer Information
Weicon
Königsberger Straße 255
48157 Münster - Germany
https://www.weicon.de/
info@weicon.de
Responsible Person for the EU
Weicon
Königsberger Straße 255
48157 Münster - Germany
https://www.weicon.de/
info@weicon.de
Easy to use: Cut - knead - process.
Easy to portion even for small repairs.
WEICON Repair Sticks are temperature resistant from -50°C to +120°C (short-term up to +150°C). They are resistant to alcohol, ester, salt water, oils and most alkalis and diluted acids. They contain no solvents and cure practically without shrinkage.
The cured material can be mechanically processed (drilled, filed, milled) and overpainted without pretreatment.
WEICON Repair Sticks adhere to:
- metal
- hard plastic
- fibre composites
- wood / wood materials
- glass / ceramics / stone
The Stick Plastic is specially designed for durable, residual elastic repairs of plastic parts* and fibre composites (GFRP, CFRP, fibreglass) and bonding of metal parts on pipes and pipe bends, for fittings and flanges, water tanks, window and door frames, pumps and housings as well as on cladding and bumpers.
* except plastics such as PE, PP, PTFE, etc.
AI-translation
+----------+
Manufacturer Information
Weicon
Königsberger Straße 255
48157 Münster - Germany
https://www.weicon.de/
info@weicon.de
Responsible Person for the EU
Weicon
Königsberger Straße 255
48157 Münster - Germany
https://www.weicon.de/
info@weicon.de
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Safety and hazard warnings | |
|---|---|
| hazard pictograms: |
|
| directive: | Complies with directive (EC) No. 1272/2008 and its adaptations. |
| signal word: | CAUTION |
| product identifier: | EC 202-013-9: 2,4,6-Tris(dimethylaminomethyl)phenol |
| Hazard warnings - health hazard: | H315: Causes skin irritation, H317: May cause an allergic skin reaction |
| Safety instructions - general: | P102: Keep out of reach of children. |
| Safety instructions - prevention: | P261: Avoid breathing dust/fume/gas/mist/vapours/spray., P264: Wash ... thoroughly after handling., P272: Contaminated work clothing should not be allowed out of the workplace., P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/. |
| Safety instructions - reaction: | P302 + P352: IF ON SKIN: Wash with plenty of water/..., P333 + P313: If skin irritation or rash occurs: Get medical advice/attention., P362: Take off contaminated clothing., P363: Wash contaminated clothing before reuse. |
| Safety instructions - disposal: | P501: Dispose of contents/container to ... |
| Customers alternatively searched for | |
|---|---|
| Knetkunststoff | Spachtel | Verkleidungsreperatur | Kunststoff | Repair Stick | Weicon | Kunststoffschweißen | Schweißen | Reparaturkit | Reparatursatz | Modeling | Plastic | Résine Plastique | Pasta Di Plastica Liquida | Material Moldear Plástico | | |
Recently viewed items