Mirror bracket -CMD MiMo Race- Vespa PK S, PK XL, PX - right hand side | Mirror brackets | Handlebar | Frame

Preview: Mirror bracket -CMD MiMo Race- Vespa PK S, PK XL, PX - right hand side

Description

Mirror holder "MiMo Race" from CMD made of stainless steel for all Vespa PK S, PK XL and PX* models.
Is attached to the original mounting points (M8 internal thread) in the lower part of the handlebars.

Embraced upwards to allow the use of modern mirror types from the motorcycle/scooter sector. These are therefore at the correct height and have the correct distance to the gear shift lever. It fits perfectly to the contour of the handlebars and thus fits harmoniously into the overall appearance of the scooter.

The bracket has a bore of Ø8mm in 8mm material thickness.
All mirrors with a thread up to 8mm can be used.
Some mirror types use an internal thread (e.g. Stage 6).
For mounting the mirror please look at the mirror specific thread and use a suitable screw (Stage6 = M8)

Material : stainless steel edged/welded
Mirror mount: Ø8mm, h=8mm

Available for right and left.

For mounting you need two M8 screws and washer and/or snap ring also in M8 (see accessories).

TIP: Also on many older vehicle types such as Rally, Spint, GT, GTR, TS, GL150 if a distance (in height of a M8 nut) is attached under the holder.

Soon also available for T5

*The right holder does not fit for PX Disc models from 1998 onwards.

_{AI-translation}

This item is currently not available.

€28.50 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon

P For this item you get fidelity point/s

OEM numbers (for comparison purposes only)
Crazy Monkey Development	CMD-MM0011

Please inform me once the product is available again.

Customers alternatively searched for
Spiegelhalter \| Spigelhalter \| Spiegelaufnahme \| Spiegelhalterung \| Lenkerhalter \| Spiegeladapter \| mirror \| bracket \| Fixation de rétroviseur \| Staffa \| sostegno per spechietto \| Fijación espejo