Write a review
Evaluations will be activated after verification.
Item successfully added.
Master brake cylinder -PIAGGIO Heng Tong- rhs - Vespa GT 250 (ZAPM45102), Vespa GTV 125 (ZAPM31301), Vespa GTV 250 (ZAPM45102), Vespa GTV 300 (ZAPM45201)
Part no.:
7670077
Description
OEM brake pump from PIAGGIO supplier Heng Tong.
Superb optics, as the whole unit is polished.
Thanks to the strict PIAGGIO quality control, this is an absolutely recommended part.
AI-translation>/em>/sub>
Superb optics, as the whole unit is polished.
Thanks to the strict PIAGGIO quality control, this is an absolutely recommended part.
Here is an overview of the force applied to the brake piston when combining different calipers and pump combinations.
In general, if the slave pistons are enlarged while the encoder pistons remain the same, there is always an increase in the braking force, although the lever travel is longer.
Conversely, if a brake pump with a larger piston but the same caliper is installed, a decrease in the force applied to the brake pistons is to be assumed, although the lever travel is smaller. Thus the brake becomes more direct, but requires more lever force for the same brake performance.
driving piston (brake caliper) | ||||
25mm | 28mm | 30mm | 32mm | |
dispenser piston | ||||
10mm | 375 N | p>470 N | 540 N | 614 N |
11mm | 310N | 389 N | 446 N | p>508 N |
12mm | 260 N | 327 N | 375 N | 427 N |
13mm | p>222 N | 278 N | 320 N | 364 N |
14mm | 191 N | 240 N | p>276 N | 313 N |
15mm | 167 N | 209 N | 240 N | 273 N |
16mm | 146 N | 184 N | 211 N | 240 N |
17mm | 130 N | 163 N | 187 N | 213 N |
AI-translation>/em>/sub>
€135.95 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Covers for brake master cylinder | |
|---|---|
| length: | 48 mm |
| width: | 36 mm |
| thickness: | 5 mm |
| number of screw holes: | 2 |
| Ø mounting hole: | M4 |
| mounting hole pitch: | 36 mm |
| Brake and cluch levers | |
| adjustable: | |
| Brake master cylinders | |
| mounting position: | handlebar right hand side |
| reservoir type: | internal reservoir |
| type of mounting: | handlebar Ø=22,2mm |
| option to mount a brake light switch: | |
| Colour | |
| main colour: | silver |
| Brake banjo screws | |
| thread: | M10 x 1,00 |
| Mirror adapters | |
| thread outside: | M8 |
| OEM numbers (for comparison purposes only) | |
| Piaggio | CM076310, CM080801 |
| Customers alternatively searched for | |
|---|---|
| Bremspumpe | Pumpe | Handbremspumpe | Bremsarmatur | Bremsenarmatur | Brake | Master | Brake Master | Brake Pump | Handlebar Pump | Maitre De Frein | Pompa Per Freno | Bomba De Freno | | |
Recently viewed items