Write a review
Evaluations will be activated after verification.
Item successfully added.
Lockwasher kit for rear layshaft -CASA PERFORMANCE, Super Safe, M7- Lambretta LI (2nd series, 3rd series), LIS, SX, TV (2nd series, 3rd series), DL, GP
Part no.:
8010331CP
Description
Super-safe extra thick rear hub nut locking ring kit + THREE allen screws for ALL Lambretta S1 + S2 + S3 + GP DL + Serveta models. This kit will fit both standard rear hubs and the new Octopus rear hub from Casa Performance.
There are a lot of people who ride their scooters both on a daily basis and for rallies and obviously safety is a key issue with so many miles to cover on over-laden small wheeled machines. One major problem has already been resolved by Casa Performance with the introduction of their Octopus 8-stud rear hub and matching multi-splined layshaft. Their forged layshafts have effectively massively reduced the chance of an axle snapping - a long-overdue issue that needed to be resolved. These layshafts also have the added advantage of having a larger 18mm threaded section and subsequently use a special 18mm internal nut (although still maintaining the standard 27mm external size, as per all Lambretta’s). In a total all-out drive to obtain a complete ‘belt & braces’ scenario with regards to safety, they have also had Vittorio Tessera produce the lockwashers for the rear hub nuts that are now both thicker than standard items and also have extra holes so that all three 7mm Allen screws can be fitted. The beauty of these new lockwasher kits is that they can be used on any original or remade Lambretta rear hub and offer extra peace of mind for all Lambretta riders.
+----------+
Manufacturer Information
Casa Performance
Via Delle Industrie 13
47824 Poggio Berni - Italy
https://www.casaperformance.com/
info@riminilambrettacentre.com
Responsible Person for the EU
Casa Performance
Via Delle Industrie 13
47824 Poggio Berni - Italy
https://www.casaperformance.com/
info@riminilambrettacentre.com
There are a lot of people who ride their scooters both on a daily basis and for rallies and obviously safety is a key issue with so many miles to cover on over-laden small wheeled machines. One major problem has already been resolved by Casa Performance with the introduction of their Octopus 8-stud rear hub and matching multi-splined layshaft. Their forged layshafts have effectively massively reduced the chance of an axle snapping - a long-overdue issue that needed to be resolved. These layshafts also have the added advantage of having a larger 18mm threaded section and subsequently use a special 18mm internal nut (although still maintaining the standard 27mm external size, as per all Lambretta’s). In a total all-out drive to obtain a complete ‘belt & braces’ scenario with regards to safety, they have also had Vittorio Tessera produce the lockwashers for the rear hub nuts that are now both thicker than standard items and also have extra holes so that all three 7mm Allen screws can be fitted. The beauty of these new lockwasher kits is that they can be used on any original or remade Lambretta rear hub and offer extra peace of mind for all Lambretta riders.
+----------+
Manufacturer Information
Casa Performance
Via Delle Industrie 13
47824 Poggio Berni - Italy
https://www.casaperformance.com/
info@riminilambrettacentre.com
Responsible Person for the EU
Casa Performance
Via Delle Industrie 13
47824 Poggio Berni - Italy
https://www.casaperformance.com/
info@riminilambrettacentre.com
€13.55 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Customers alternatively searched for | |
|---|---|
| Sicherungs | Set | Hinterradmutter | AchsMutternkit | Sicherungskit | Hinterradsicherung | Splint | Selbstsichernde | Selbstsichernd | Mutter | Nebenwelle | Vorgelegewelle | Nebenwellenmutter | Lock | Washer | Set | Rear | Hub | Nut | Jeu De Rondelles Frein D'Écrou De Tambour Arrière | Rondella Insieme Mozzo Posteriore Dado | Kit De Seguridad Tuerca Rueda Trasera | | |
Recently viewed items