Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Liquid gasket -LOCTITE omniVISC® 1050- 90g

3600017
Liquid gasket -LOCTITE omniVISC® 1050- 90g
Liquid gasket -LOCTITE omniVISC® 1050- 90g

Description


OmniVISC® 1050 Is a versatile, elastic silicone rubber adhesive. It is ready for use and cures at room temperature by contact with the film of moisture present on all surfaces and with atmospheric humidity.

It is particularly suitable for bonding and sealing materials with different thermal expansion, e.g. metals, glass, ceramics, wood, fabric, leather, elastomers and thermosets to and among each other. OmniVISC® 1050 starts to cure after approx. 15 min (recognizable by a "skin formation"). The curing progresses more or less quickly depending on the size of the surface exposed to humidity. Depending on the application, a complete curing time of 24 h to several days must be expected.

After complete curing, the material has good chemical resistance, e.g. against water, weak acids and alkalis, fuels and lubricants, inert and fuel gases, oxygen, hydraulic fluids, etc. It has a wide temperature application range from -70 °C to +200 °C under continuous load. It retains its elasticity in this range. It is suitable both for narrow adhesive and sealing gaps and for filling large joints and gaps. The silicone rubber adhesive has anti-adhesive properties. Therefore, neither lacquers and paints nor other media adhere to cured omniVISC surfaces.

It is characterized by its very good electrical insulating properties. Together with its resistance to abrasion, moisture, weathering and chemicals, it is suitable as a protective coating. OmniVISC® 1050 is colorlessly transparent and has good wetting and adhesive properties due to its soft-flowing properties.

omniVISC® 1050

offers a range of rational solutions for all

manufacturing and repair problems, e.g.:

  • seals formed on site instead of a myriad of different finished seals made of paper, cork, rubber, etc. especially in vehicle construction
  • for bonding and sealing glass with metals and plastics in vehicle construction, architecture and apparatus engineering
  • for sealing or securing threads when easy solubility is required, i.e. when even low-strength anaerobic adhesives (e.g. omniFIT 50 M) are still too strong
  • for fixing aluminium type and company signs on rough surfaces of other materials instead of previous screws or rivets
  • for bonding fabrics of all kinds with plastics and metals in the automotive and appliance industry
  • for bonding thermosetting plastics in relay and switch construction with metal parts especially for temperature loads
  • for filling and sealing joints at bushings of cables, pipes, devices, switches, lighting fixtures, especially in explosion-proof rooms
  • for abrasion-resistant and anti-adhesive lining of containers, Bunkers and silos in chemical apparatus engineering
  • for sealing all kinds of viewing windows in instrument front panels, heating furnaces, gas appliances, water meters and caravans

TIP: Excellent for use as an exhaust sealant or for the cylinder head!


AI-translation

 
€32.90 *
Unit: 90 g (€0.37 * / 1 g)

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Safety and hazard warnings
hazard pictograms:
sales sestrictions: This article may only be sold to persons over the age of 18.
directive: Complies with directive (EC) No. 1272/2008 and its adaptations.
signal word: DANGER
product identifier: EC 224-221-9: Methylsilanetriyl triacetate
Hazard warnings - health hazard: H315: Causes skin irritation, H318: Causes serious eye damage.
Safety instructions - prevention: P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/.
Safety instructions - reaction: P302 + P352: IF ON SKIN: Wash with plenty of water/..., P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lens
Customers alternatively searched for
Konstruktionskleber | Kleber | Dichtungskleber | Einkleben | Wellendichtringkleber | Lagerkleber | Gehäusekleber | Assembly | Glue | Assembly Glue | Thread Lock | Retainer | Adhesive | Glue Blocpress | Colla | Pegamento De Construcción |
OmniVISC® 1050 Is a versatile, elastic silicone rubber adhesive. It is ready for use and cures...Continue reading

Fits the following vehicles


  • Universal

Ratings


15 Oct 2016

Auspuff abgedichtet

28 Feb 2016

Vielseitig verwendbare Silikondichtung im Kfz-Bereich. Ich verwende es zur Montage von Papierdichtungsmaterialien

12 Jan 2016

Sehr gut.

6 Oct 2015

Tolles Produkt, sehr gut zu verarbeiten zum zusätzlichen Dichten von Motorhälften giebts meiner Meinung nach nichts besseres.

26 Aug 2015

Optimale Dichtmasse - besser als alle Silikondichtmassen.

18 May 2015

Super

15 Apr 2015

ist genau das, was ich bestellt habe

Alternative items


Liquid gasket -NORMFEST Plastomar- 85 g
Normfest
7675222
Normfest
Liquid gasket -NORMFEST Plastomar- 85 g
The item is ordered and will be in stock soon
€15.29 *
Unit 0.08 l (€191.13 * / 1 l)
*incl. VAT plus shipping costs
Flange sealant - for gaskets -LOCTITE 574- 50ml / 56g - anaerobic hardening
Loctite
3332763
Loctite
Flange sealant - for gaskets -LOCTITE 574- 50ml / 56g - anaerobic hardening
Available immediately (delivery time 1-3 working days*)
€34.36 *
Unit 50 ml (€0.69 * / 1 ml)
*incl. VAT plus shipping costs
Liquid gasket -CORTECO Evo300- +250°C - 70ml
Corteco
3332471
Corteco
Liquid gasket -CORTECO Evo300- +250°C - 70ml
Available immediately (delivery time 1-3 working days*)
€16.51 *
Unit 0.07 l (€235.86 * / 1 l)
*incl. VAT plus shipping costs
Liquid gasket -LOXEAL silicone (59-30) +300°C - 75ml
Loxeal
3333224
Loxeal
Liquid gasket -LOXEAL silicone (59-30) +300°C - 75ml
Available immediately (delivery time 1-3 working days*)
€11.90 *
Unit 0.07 l (€170.00 * / 1 l)
*incl. VAT plus shipping costs
Liquid gasket -NORMFEST, orange- 50g
Normfest
NOF2896521
Normfest
Liquid gasket -NORMFEST, orange- 50g
Available immediately (delivery time 1-3 working days*)
€19.79 *
Unit 0.05 kg (€395.80 * / 1 kg)
*incl. VAT plus shipping costs
Liquid gasket -NORMFEST, green- 50g
Normfest
NOF2896520
Normfest
Liquid gasket -NORMFEST, green- 50g
Available immediately (delivery time 1-3 working days*)
€19.79 *
Unit 0.05 kg (€395.80 * / 1 kg)
*incl. VAT plus shipping costs
Liquid gasket -WÜRTH Silikon Spezial- 70 ml
Würth
3600010
Würth
Liquid gasket -WÜRTH Silikon Spezial- 70 ml
Available immediately (delivery time 1-3 working days*)
€14.95 *
Unit 0.07 l (€213.57 * / 1 l)
*incl. VAT plus shipping costs
Liquid gasket -ATHENA, Athesil RTV Silicone- 80 ml
Athena
AT999002
Athena
Liquid gasket -ATHENA, Athesil RTV Silicone- 80 ml
Available immediately (delivery time 1-3 working days*)
€15.26 *
Unit 0.08 l (€190.75 * / 1 l)
*incl. VAT plus shipping costs
Liquid gasket -ELRING Dirko HT red- 70ml
Elring
3600041
Elring
Liquid gasket -ELRING Dirko HT red- 70ml
Available immediately (delivery time 1-3 working days*)
€15.90 *
Unit 0.07 l (€227.14 * / 1 l)
*incl. VAT plus shipping costs
Recently viewed items