Write a review
Evaluations will be activated after verification.
Item successfully added.
Jet -DELLORTO (type: 1486)- 5mm (60)
Part no.:
2505060
Description
The main jet is considerably involved in the mixture preparation of the carburetor.
If it is too small, the engine dies off under full load and/or runs so leanly that the piston including cylinder overheats and a cylinder damage would be the consequence.
If it is too large, the mixture is too rich, the engine runs very unevenly and can only deliver a fraction of its possible power.
Here it is important to find the ideal compromise. To determine the correct main jet, it is first of all selected from the belly so large that the goal is an engine that stutters heavily under full load. Of course it needs some experience, but a nozzle is also quickly changed.
AI-translation
+----------+
Manufacturer Information
Dellorto
Via Kennedy 7
22060 Cabiate - Italy
https://www.dellorto.it/
info@dellorto.it
Responsible Person for the EU
Dellorto
Via Kennedy 7
22060 Cabiate - Italy
https://www.dellorto.it/
info@dellorto.it
If it is too small, the engine dies off under full load and/or runs so leanly that the piston including cylinder overheats and a cylinder damage would be the consequence.
If it is too large, the mixture is too rich, the engine runs very unevenly and can only deliver a fraction of its possible power.
Here it is important to find the ideal compromise. To determine the correct main jet, it is first of all selected from the belly so large that the goal is an engine that stutters heavily under full load. Of course it needs some experience, but a nozzle is also quickly changed.
Once you have found such a nozzle you mount a smaller nozzle until the engine does not stutter under full load any more.
This way you have already an ideal basic lubrication which ensures that the engine does not get too little fuel under full load, which it also needs to cool the piston and cylinder. The Dell'Orto carburettors in conventional slide valve design, where the main jet is positioned directly in the float chamber (no SI carburettors), use as:
secondary jet 4mm / 5mm
main jet 5mm / 6mm
jets.
The following carburetors use the 5mm nozzle type as a secondary nozzle:
PHBH, PHBL, VHSA, VHSB, VHSC
The following carburetors use the 5mm nozzle type as a main nozzle:
PHBD, PHBG, SHA, SHBC
AI-translation
+----------+
Manufacturer Information
Dellorto
Via Kennedy 7
22060 Cabiate - Italy
https://www.dellorto.it/
info@dellorto.it
Responsible Person for the EU
Dellorto
Via Kennedy 7
22060 Cabiate - Italy
https://www.dellorto.it/
info@dellorto.it
€2.69 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Carburettor jets | |
|---|---|
| used with carburettors brands: | Dellorto |
| used as idle jet in: | Dellorto PHBE, Dellorto PHBH, Dellorto PHBL, Dellorto PHF, Dellorto PHM, Dellorto PHSB, Dellorto VHSA, Dellorto VHSB |
| used as main jet in: | Dellorto MA, Dellorto MB, Dellorto PHBD, Dellorto PHBG, Dellorto PHCF, Dellorto SH1/2, Dellorto SHA, Dellorto SHB, Dellorto SHBA, Dellorto SHBC, Dellorto UA, Dellorto UB |
| diameter head: | 7 mm |
| thread: | M5 x 0,75 |
| length of thread: | 5 mm |
| total length: | 8 mm |
| OEM numbers (for comparison purposes only) | |
| Piaggio | 083900, 83900 |
| Dellorto | 0148660_02 |
| Customers alternatively searched for | |
|---|---|
| Düse | Phbh | Phbl | Vhst | Sha | Shb | Shbc | Phbg | Vhsa | Vhsb | Vhs | Phbd | Phbe | Vergaserdüse | Hauptdüse | Sproeier | Buse | Mainjet | Jet | Gicleur | Getto Massimo | Chiclé | | |
Available versions
Recently viewed items