Write a review
Evaluations will be activated after verification.
Item successfully added.
Intake manifold -MB DEVELOPMENTS- Lambretta 125-190cc - CS=Ø34mm (carburetors Ø28-30mm - PHBH, VHSH, PWK28, TMX30, Smartcarb 26-28)
Part no.:
8000071
Description
Lambretta intake manifold from MB Developments for piston controlled Lambretta cylinders with 125 - 186 cc displacement. Herewith carburetors with 34 mm connection width can be installed.
Carburetors like:
The position of the carburetor is such that the original air filter box can only be used in a limited way. The easiest way is to use a foam air filter (Art. No. 7671197 or the Evergreen intake hose).
Under certain circumstances the sealing surfaces of intake manifold and cylinder inlet have to be adapted to each other. The best way to do this is to use an inlet gasket as a template and adjust the areas with the Dremel.
Included is a M7 screw that replaces the long stud bolt. When using the screw, the engine does not have to be lowered to remove the intake.
You can find suitable connecting rubbers under the article numbers: 1110024, 7670781 or 1110020.
AI-translation
+----------+
Manufacturer Information
MB-Developments
Coalpit Road
DN12 4LJ Doncaster - United Kingdom
https://www.lambrettaspares.com/
info@mbdevelopments.co.uk
Responsible Person for the EU
Scooter Center GmbH
Kurt-Schumacher-Str. 1
50129 Bergheim-Glessen - Germany
https://www.scooter-center.com/
info@scooter-center.com
Carburetors like:
- Keihin PWK 28
- Dellorto PHBH 28
- Dellorto PHBH 30
- Dellorto VHST
- Mikuni TM30
The position of the carburetor is such that the original air filter box can only be used in a limited way. The easiest way is to use a foam air filter (Art. No. 7671197 or the Evergreen intake hose).
Under certain circumstances the sealing surfaces of intake manifold and cylinder inlet have to be adapted to each other. The best way to do this is to use an inlet gasket as a template and adjust the areas with the Dremel.
Included is a M7 screw that replaces the long stud bolt. When using the screw, the engine does not have to be lowered to remove the intake.
You can find suitable connecting rubbers under the article numbers: 1110024, 7670781 or 1110020.
AI-translation
+----------+
Manufacturer Information
MB-Developments
Coalpit Road
DN12 4LJ Doncaster - United Kingdom
https://www.lambrettaspares.com/
info@mbdevelopments.co.uk
Responsible Person for the EU
Scooter Center GmbH
Kurt-Schumacher-Str. 1
50129 Bergheim-Glessen - Germany
https://www.scooter-center.com/
info@scooter-center.com
€43.90 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Intake manifolds | |
|---|---|
| fits type series: | Lambretta LI, LIS, SX, TV, DL, GP |
| connection size: | 34 mm |
| material: | aluminium |
| connection type: | Gummiverbindung |
| type intake manifold: | piston ported |
| cylinder type: | 125-190cc |
| reed valve incl.: | |
| Customers alternatively searched for | |
|---|---|
| Ansaugstutzen | Ansauggummi | Ansaugbrücke | Ansauger | Ansaug Stutzen | Verbindungsstutzen | Ansaugstück | Schnüffelstück | Vergasergummi | Intake | Manifold | Pipe D'Admission | Collettore Aspirazione | Toma De Aspiración | Toma de admisión | Tobera | | |
Available versions
Related items
variants
Normfest
9900005
Hose clamp -UNIVERSAL- 32-50mm - band width = 12mm
9900005
4 further versions from €1.49
-
Available immediately (delivery time 1-3 working days*)Ø=10-16mm (7.5mm)
-
Available immediately (delivery time 1-3 working days*)Ø=10-16mm (9mm)
-
Available immediately (delivery time 1-3 working days*)Ø=20-32mm (9mm)
-
Available immediately (delivery time 1-3 working days*)Ø=25-40mm (9mm)
Recently viewed items