Write a review
Evaluations will be activated after verification.
Item successfully added.
Intake manifold -MALOSSI 2-stud, rotary valve- Vespa V50, PV125 - CS=28.5mm
Part no.:
M024098
Description
The rotary vane intake manifolds for the small frame engines offer the possibility to use carburettors up to 24mm. This allows to realize quite powerful engines, which can easily reach the 120kmh mark. To enable the full performance potential of the engine, the engine housing should always be adapted to the cross-section of the carburetor (as far as possible). Whether a larger carburettor and thus a larger intake manifold is necessary at all, depends on the displacement and the speed at which the full power should be delivered. A 133ccm cylinder (e.g. Polini) with a nominal speed of 7000 rpm is very well served with a carburettor cross section of 24mm. Using larger carburetor diameters on such an engine does not increase the power output and, apart from the engine's efficiency, it also usually reduces the tunability. It only makes sense to use larger carburettors if the engine delivers its full power only at a higher rpm (not to be confused with the maximum rpm the engine can reach in third gear!) As an example, the 136cc Malossi is the only one to be mentioned here. This one is already being driven with the direct intake kit with a cross-section of 25mm. With a suitable exhaust and other remaining design of the engine this cylinder can also use carburettors up to 30mm in a reasonable way. Intake manifolds for such extreme tuning variants are offered by us in long version by Zirri. With these intake manifolds the carburettor is still in its original position.
AI-translation
AI-translation
€72.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Intake manifolds | |
|---|---|
| fits type series: | Vespa Smallframe |
| connection size: | 28.5 mm |
| material: | aluminium |
| connection type: | Gummiverbindung |
| type intake manifold: | rotary valve |
| number of fixing holes: | 2 hole V50 |
| reed valve incl.: | |
| OEM numbers (for comparison purposes only) | |
| Malossi | 204646, M204646 |
| Customers alternatively searched for | |
|---|---|
| 204646 | M204646 | Ansaugstutzen | Ansauggummi | Ansaugbrücke | Ansauger | Ansaug Stutzen | Verbindungsstutzen | Ansaugstück | Schnüffelstück | Vergasergummi | Intake | Manifold | Pipe D'Admission | Collettore Aspirazione | Toma De Aspiración | Toma de admisión | Tobera | | |
Recently viewed items