Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Indicator flasher relay -OEM QUALITY 3-PIN 12V 10/21W AC- Vespa PK S, PK XL, PK XL2, PX EFL (1984-), Cosa, Cosa FL, T5 125cc, APE

9520004
Indicator flasher relay -OEM QUALITY 3-PIN 12V 10/21W AC- Vespa PK S, PK XL, PK XL2, PX EFL (1984-), Cosa, Cosa FL, T5 125cc, APE
Indicator flasher relay -OEM QUALITY 3-PIN 12V 10/21W AC- Vespa PK S, PK XL, PK XL2, PX EFL (1984-), Cosa, Cosa FL, T5 125cc, APE
Indicator flasher relay -OEM QUALITY 3-PIN 12V 10/21W AC- Vespa PK S, PK XL, PK XL2, PX EFL (1984-), Cosa, Cosa FL, T5 125cc, APE
Indicator flasher relay -OEM QUALITY 3-PIN 12V 10/21W AC- Vespa PK S, PK XL, PK XL2, PX EFL (1984-), Cosa, Cosa FL, T5 125cc, APE
Indicator flasher relay -OEM QUALITY 3-PIN 12V 10/21W AC- Vespa PK S, PK XL, PK XL2, PX EFL (1984-), Cosa, Cosa FL, T5 125cc, APE

Description


Inexpensive aftermarket flasher relay for all Vespa with alternating current (AC), such as all PX/PK Lusso models.
The relay does not contain electronics for rectification and is therefore only suitable for AC.

It has 3 connections:


  • C (green dot) = alternating current input
  • L1 (white dot) = switched current output
  • L2 (red dot) = clocked current output

  • The current is alternately clocked to L1 and L2. This achieves the alternating clocking of the front and rear turn signals. The purpose behind this is to reduce the on-board load to a minimum so that the turn signals still cycle properly even when idling (with little voltage from the alternator).


    TIP: Due to the electronic control of the turn signal, it is also perfectly suitable for handlebar end turn signals or similar. In contrast to a mechanically controlled relay (such as the round DC sheet metal relays of the PX old models) then also turn signals with less load (e.g. if only 10W bulbs are used) clock.
    The turn signal switch is then simply connected to L1. L2 can, but does not have to, serve as an output for a turn signal control light.


    (US)

    NOTE: Piaggio sources its goods from different manufacturers in Europe and Asia. The picture material can therefore differ from the delivered goods.

    AI-translation



    +----------+
    Responsible Person for the EU
    Scooter Center GmbH
    Kurt-Schumacher-Str. 1
    50129 Bergheim-Glessen - Germany
    https://www.scooter-center.com/
    info@scooter-center.com
     
    €17.90 *

    incl. VAT plus shipping costs

    Available immediately (delivery time 1-3 working days*)
    P For this item you get fidelity point/s
    OEM numbers (for comparison purposes only)
    Piaggio 195703, 163968, 163497, 213594, 1957035
    Customers alternatively searched for
    Blinkrelais | Blinkerrelais | Relais | Lenkerenden | Lenkerblinker | Blinker | Regler | Blinkergeber | Blinkgeber | Steuerung | Flasher | Relay | Relais Clignotant | Intermettenza Frecce | Relé De Intermitente |
    Inexpensive aftermarket flasher relay for all Vespa with alternating current (AC), such as all...Continue reading

    Fits the following vehicles


    Ratings


    11 Jan 2018

    Funkioniert ,passt,mehr muß nicht!

    16 Jul 2015

    Erfüllt seinen Zweck guter Preis

    22 Jan 2015

    gesucht wurde ein AC Relais für den nachträglichen Umbau einer Yamaha Big Wheel 200 N aus 1986. Das Relais ist sehr gut produziert und funktioniert sehr gut. Probeläufe des neuen Kabelbaums mit Relais wurden an einem variabel steuerbaren Märklin Modellbahntrafo ( Wechselstromtrafo ) im Bereich 13VAC - 5VAC. Einwandfreie Funktion.

    Recently viewed items