Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Ignition -MALOSSI VesPower MK2- Vespa V50, V90, PV125, ET3, PK S (cone 19mm) - models w/o brake light

M5516952
Ignition -MALOSSI VesPower MK2- Vespa V50, V90, PV125, ET3, PK S (cone 19mm) - models w/o brake light
Ignition -MALOSSI VesPower MK2- Vespa V50, V90, PV125, ET3, PK S (cone 19mm) - models w/o brake light
Ignition -MALOSSI VesPower MK2- Vespa V50, V90, PV125, ET3, PK S (cone 19mm) - models w/o brake light
Ignition -MALOSSI VesPower MK2- Vespa V50, V90, PV125, ET3, PK S (cone 19mm) - models w/o brake light
Ignition -MALOSSI VesPower MK2- Vespa V50, V90, PV125, ET3, PK S (cone 19mm) - models w/o brake light

Description


MKII version of the Malossi VesPower ignition. Now with a new 4-fold bolted impeller with modified wing profile for a lower noise level.

The Malossi VesPower ignition offers the following advantages:

  • complete exchange ignition
  • smaller flywheel mass (900/1200gr.)
  • Agile acceleration
  • More power
  • Dynamic ignition timing adjustment
  • More torque
  • Spontaneous throttle response
  • 90Watt light output
  • Modern regulator incl.
  • Reinforced fan ring
  • Optionally more flywheel mass can be mounted (sold separately)

The Malossi Vespower ignition is based on the same base as the well known Vespatronic, Pinasco Flytech or Polini IDM. The ignition base plate has no pickup. The ignition signal is picked up here via the light frequency. With increasing speed the ignition timing is reduced via the CDI. The engine has a high pre-ignition angle for much torque in the lower speed range. This is reduced with increasing speed, at which the exhaust strongly supports the charge exchange. This relieves the engine thermally and increases the torque.

The light flywheel mass provides a very dynamic throttle response and greatly improved acceleration. The smaller fan blades fit perfectly to the higher speed level of the tuned engine where the large blades of the original fan wheel would turn empty. The ignition is also suitable for everyday and touring engines due to the optionally available and adaptable flywheel mass rings. Here the increased flywheel mass helps the engine to a smoother engine running and an improved elasticity in the upper gears.
The stiffening fins of the plastic vane wheel prevent effectively a tearing or breaking.

For the PX models there is beside the standard VesPower ignition with 1200gr. also a 900gr. race version. This is then however afterwards no longer upgradeable to more flywheel mass.


AI-translation

 
€360.95 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
OEM numbers (for comparison purposes only)
Malossi 5516952, M5516952
Customers alternatively searched for
5516952 | M5516952 | Zündung | Lichtmaschine | Lima | Lichtmaschiene | Grundplatte | Zündgrundplatte | Zündungsgrundplatte | Ankerplatte | Zündanker | Zündankerplatte | Zündplatte | Ruckeln | Zündaussetzer | Zündungsprobleme | Zündungsaussetzer | Zündfunke | Funke | Schwacher | Ignition | Ignite | Bad | Spark | Detonation | Allumage | Statore Accensione Completo | Encendido |

Available versions

Part no.: Type Price Stock Cart Save
Part no.: M5516951 Type models with brake light Price
€389.00
Stock
Available immediately (delivery time 1-3 working days*)
Cart Save
Part no.: M5516952 Type models without brake ligh Price
€360.95
Stock
Available immediately (delivery time 1-3 working days*)
Cart Save

Alternative items


Ignition -POLINI IDM- Vespa PK XL (20mm & 24mm cone)
Polini
P1710543
Polini
Ignition -POLINI IDM- Vespa PK XL (20mm & 24mm cone)
Available immediately (delivery time 1-3 working days*)
€355.91 *
*incl. VAT plus shipping costs
Ignition -BGM PRO stator HP V2.5 silicone (6 volt)- Vespa ET3 (VMB1T)
bgm Pro
BGM8035
bgm Pro
Ignition -BGM PRO stator HP V2.5 silicone (6 volt)- Vespa ET3 (VMB1T)
Available immediately (delivery time 1-3 working days*)
€94.00 *
*incl. VAT plus shipping costs

Ersatzteile


Flywheel fan -MALOSSI VesPower- 4 holes - 5515475, 5515610, 5515660, 5515684, 5515702
Malossi
7416936B
Malossi
Flywheel fan -MALOSSI VesPower- 4 holes - 5515475, 5515610, 5515660, 5515684, 5515702
Available immediately (delivery time 1-3 working days*)
€29.95 *
*incl. VAT plus shipping costs
Screw set for ignition -MALOSSI VesPower 3-holes- 5515475, 5515660, 5515684, 5516219
Malossi
M1915688B
Malossi
Screw set for ignition -MALOSSI VesPower 3-holes- 5515475, 5515660, 5515684, 5516219
Available immediately (delivery time 1-3 working days*)
€19.94 *
*incl. VAT plus shipping costs
Voltage regulator -MALOSSI- for Malossi VesPower
Malossi
M5515480B
Malossi
Voltage regulator -MALOSSI- for Malossi VesPower
Available immediately (delivery time 1-3 working days*)
€59.00 *
*incl. VAT plus shipping costs
Recently viewed items