Ignition -MALOSSI VesPower MK2- Vespa PX - moment of inertia 28 kg/cm² (1200gr.) | Ignitions | Ignition | Engines

Preview: Ignition -MALOSSI VesPower MK2- Vespa PX - moment of inertia 28 kg/cm² (1200gr.)

Description

MKII version of the Malossi VesPower ignition. Now with a new 4-fold bolted impeller with modified wing profile for a lower noise level.

The Malossi VesPower ignition offers the following advantages:

complete exchange ignition

flywheel mass (1200gr.)

Agile acceleration

More power

Dynamic ignition timing adjustment

More torque

Spontaneous throttle response

90Watt light power

Modern regulator incl.

Reinforced fan ring

Optionally more flywheel mass can be mounted (sold separately)

The Malossi Vespower ignition is based on the same base as the well known Vespatronic, Pinasco Flytech or Polini IDM. The ignition base plate has no pickup. The ignition signal is picked up here via the light frequency. With increasing speed the ignition timing is reduced via the CDI. The engine has a high pre-ignition angle for much torque in the lower speed range. This is reduced with increasing speed, at which the exhaust strongly supports the charge exchange. This relieves the engine thermally and increases the torque.

The light flywheel mass provides a very dynamic throttle response and greatly improved acceleration. The smaller fan blades fit perfectly to the higher speed level of the tuned engine where the large blades of the original fan wheel would turn empty. The ignition is also suitable for everyday and touring engines due to the optionally available and adaptable flywheel mass rings. Here the increased flywheel mass helps the engine to a rounder engine run and an improved elasticity in the upper gears.
The stiffening fins of the plastic impeller effectively prevent a tear or break.

This version is the version with 1200gr. flywheel mass. This version can be retrofitted with more flywheel mass, this is not possible for the version with only 900gr..

Note: German PX models before 1984 (with battery), the so-called PX old models with ignition lock on the steering head cover, must be modified for the use of this ignition on the wiring harness.

For this it is necessary to replace the existing voltage regulator. Ideally suitable here is the BGM voltage regulator (BGM6690).

For wiring instructions see "downloads"

(US)

_{AI-translation}

€359.00 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)

P For this item you get fidelity point/s

OEM numbers (for comparison purposes only)
Malossi	5516953, M5516953

Customers alternatively searched for
5516953 \| M5516953 \| Zündung \| Lichtmaschine \| Lima \| Lichtmaschiene \| Grundplatte \| Zündgrundplatte \| Zündungsgrundplatte \| Ankerplatte \| Zündanker \| Zündankerplatte \| Zündplatte \| Ruckeln \| Zündaussetzer \| Zündungsprobleme \| Zündungsaussetzer \| Zündfunke \| Funke \| Schwacher \| Ignition \| Ignite \| Bad \| Spark \| Detonation \| Allumage \| Statore Accensione Completo \| Encendido \|

Available versions

Part no.:	Type	Price	Stock	Cart	Save
Part no.: M5516956	Type 17 kg/cm² (900g)	Price €389.00	Stock Available immediately (delivery time 1-3 working days*)	Cart	Save
Part no.: M5516953	Type 28 kg/cm² (1200g)	Price €359.00	Stock Available immediately (delivery time 1-3 working days*)	Cart	Save