Write a review
Evaluations will be activated after verification.
Item successfully added.
Horn -OEM QUALITY 6V AC- Vespa V50, V90, PV125, GT125 (VNL2T), GTR125 (VNL2T), TS125 (VNL3T), Sprint (Italian models), Rally180 (VSD1T), Rally200 (VSE1T) (Italian models)
Part no.:
7672295
Description
The well-known company Grabor has been working together with Piaggio for decades, and as an original equipment manufacturer, supplies many electrical components for the Vespa. In modern and hectic traffic, functioning horns are a real safety feature. Over the decades the inside of horns often suffers from corrosion.
AI-translation
With this spare part you can help your Vespa to old assertiveness.
Good fit and easy to install.
AC/DC?
AC stands for alternating current = alternating voltage = ratchet
DC stands for direct current = direct current = horn
ratchet
Many old vehicles without batteries use alternating voltage as the on-board power supply. Only so-called buzzers can be connected to it. These are recognizable by a tone pitch which increases and decreases with engine speed.
Horns
Due to the non-constant frequency, buzzers have not been in conformity with the registration of German vehicles since approx. 1980. At this time, most vehicles were equipped with a battery and a DC on-board power supply. Here the real horns are used, recognizable by a constantly constant pitch, independent of the engine speed.
Exceptions
There are some exceptions where a DC horn was used, despite the AC on-board power supply. Piaggio used so-called horn rectifiers from 1984 onwards, with the introduction of the Lusso series. Here, a special bridge rectifier with downstream capacitors, which is only responsible for the horn, converts the AC on-board power supply for the horn into DC. This rectifier can also be retrofitted to all vehicles with a 12V AC on-board power supply if, for example, the TÜV does not accept a ratchet.
(US)
AI-translation
€49.99 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Colour | |
|---|---|
| main colour: | silver |
| Horns | |
| tension: | 6 V |
| current: | AC |
| outer diameter: | 74 mm |
| diameter hole circle: | 65 mm |
| number of fixing holes: | 2, 3, 4, 6 |
| special feature: | Bachel Relief am Rand |
| OEM numbers (for comparison purposes only) | |
| Piaggio | 70300, 070300. 98458, E.2538, E2538 |
| Customers alternatively searched for | |
|---|---|
| Hupe | Schnarre | Horn | Signal | Signalhorn | Klingel | Sirene| Klaxon | Claxon | Claxón | Bocina | Corneta | Trompeta | | |
Related items
OEM-Qualität
3330707
Digital multimeter -CTM-43 Big 2V-600V- with rubber holster, acustic continuity tester and hold function
3330707
The item is ordered and will be in stock soon
€29.99
*
*incl. VAT plus shipping costs
Recently viewed items