Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Horn -OEM QUALITY 12V AC- Vespa - Ø=75mm - zinc - suitable for e.g. Vespa PX (-1984) without battery

232K15
Horn -OEM QUALITY 12V AC- Vespa - Ø=75mm - zinc - suitable for e.g. Vespa PX (-1984) without battery
Horn -OEM QUALITY 12V AC- Vespa - Ø=75mm - zinc - suitable for e.g. Vespa PX (-1984) without battery
Horn -OEM QUALITY 12V AC- Vespa - Ø=75mm - zinc - suitable for e.g. Vespa PX (-1984) without battery
Horn -OEM QUALITY 12V AC- Vespa - Ø=75mm - zinc - suitable for e.g. Vespa PX (-1984) without battery

Description


Horn, respectively ratchet for 12V
Fits to many oldies. Galvanized. Diameter 75mm (also PX ratchet)

AC/DC?

AC stands for alternating current = AC voltage = ratchet
DC stands for direct current = DC voltage = horn

ratchet
Many old vehicles without battery use AC voltage as on-board power supply. Only so-called buzzers can be connected to it. These are recognizable by a tone pitch which increases and decreases with engine speed.

Horns
Due to the non-constant frequency, buzzers have not been in conformity with the registration of German vehicles since approx. 1980. At this time, most vehicles were equipped with a battery and a DC on-board power supply. Here the real horns are used, recognizable by a constantly constant pitch, independent of the engine speed.

Exceptions
There are some exceptions where a DC horn was used, despite the AC on-board power supply. Piaggio used so-called horn rectifiers from 1984 onwards, with the introduction of the Lusso series. Here, a special bridge rectifier with downstream capacitors, which is only responsible for the horn, converts the AC on-board power supply for the horn into DC. This rectifier can also be retrofitted to all vehicles with a 12V AC on-board power supply if, for example, the TÜV does not accept a ratchet.

NOTE: Almost all German Vespa PK and PX models require a horn (DC).

(US)


AI-translation

 
This item is currently not available.
€27.95 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon
P For this item you get fidelity point/s
Colour
main colour: silver
Horns
tension: 12 V
current: AC
outer diameter: 74 mm
diameter hole circle: 65 mm
number of fixing holes: 2, 3, 4, 6
special feature: -
OEM numbers (for comparison purposes only)
Piaggio 189379, 163599, 148436
Please inform me once the product is available again.
Customers alternatively searched for
Hupe | Schnarre | Horn | Signal | Signalhorn | Klingel | Sirene| Klaxon | Claxon | Claxón | Bocina | Corneta | Trompeta |
Horn, respectively ratchet for 12V Fits to many oldies. Galvanized. Diameter 75mm (also PX...Continue reading

Fits the following vehicles


Ratings


21 Jan 2018

costa poco ma vale poco
utolizzo privato

10 Jan 2018

Einbau in eine V50 funktioniert tadellos. Schnarre arbeitet zuverlässig und in gewohnter Lautstärke :)

15 Dec 2015

Verarbeitung nicht ganz auf OEM Niveau , aber OK.

11 Feb 2015

Hupt!

10 Feb 2015

Preis-Leistung sehr gut. Passte genau. Was will man mehr.

Recently viewed items