Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Horn -BACHEL 6V DC- Vespa VL2T-VL3T, VB1T - (models with battery)

7674478
Horn -BACHEL 6V DC- Vespa VL2T-VL3T, VB1T - (models with battery)
Horn -BACHEL 6V DC- Vespa VL2T-VL3T, VB1T - (models with battery)
Horn -BACHEL 6V DC- Vespa VL2T-VL3T, VB1T - (models with battery)

Description


AC/DC?

AC stands for alternating current = alternating voltage = ratchet
DC stands for direct current = direct voltage = horn

ratchet
Many old vehicles without batteries use alternating voltage as the on-board power supply. Only so-called buzzers can be connected to it. These are recognizable by a tone pitch which increases and decreases with engine speed.

Horns
Due to the non-constant frequency, buzzers have not been in conformity with the registration of German vehicles since approx. 1980. At this time, most vehicles were equipped with a battery and a DC on-board power supply. Here the real horns are used, recognizable by a constantly constant pitch, independent of the engine speed.

Exceptions
There are some exceptions where a DC horn was used, despite the AC on-board power supply. Piaggio used so-called horn rectifiers from 1984 onwards, with the introduction of the Lusso series. Here, a special bridge rectifier with downstream capacitors, which is only responsible for the horn, converts the AC on-board power supply for the horn into DC. This rectifier can also be retrofitted to all vehicles with a 12V AC on-board power supply if, for example, the TÜV does not accept a ratchet.

NOTE: Almost all German Vespa PK and PX models require a horn (DC).

(US)


AI-translation

 
€51.50 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Colour
main colour: chrome
Horns
tension: 6 V
current: DC
outer diameter: 74 mm
diameter hole circle: 65 mm
number of fixing holes: 4
special feature: -
OEM numbers (for comparison purposes only)
Piaggio 25714, 025714
Customers alternatively searched for
Hupe | Horn | Signal | Signalhorn | Klingel | Sirene | Schnarre| Klaxon | Claxon | Claxón | Bocina | Corneta | Trompeta |
AC/DC? AC stands for alternating current = alternating voltage = ratchet DC stands for...Continue reading
Recently viewed items