Write a review
Evaluations will be activated after verification.
Item successfully added.
Gearbox complete incl. gear cluster, drive shaft with gear cogs 1, 2, 3, 4 -PINASCO- Vespa Wideframe 1955-1959 ( V30-33, VM, VN, VL, VB1)
Part no.:
PN26270932
Description
4-speed conversion gearbox for Vespa Wideframe models (VM1T*, VM2T*, VN1T*, VN2T, VL1T, VB1T)
The gearbox set contains
- Main shaft
- Gearwheels Gear 1-4
- Shift bolt Shift cross
- Auxiliary shaft axle incl. For installation, the motor housing must be slightly modified / milled in the area of the third / fourth auxiliary shaft gearwheel. The auxiliary shaft needles used are those of the PX125-200 models (21stk.). As shifting gear please use the type of the Vespa GS150 models (VS3-VS5).
*For the engines of the Vespa VM1T/VM2T and VN1T series the main shaft supplied by Pinasco does not fit, the original one must be used. The Pinasco gear pinions can then be used on this shaft.
The fourth gear ratio corresponds to the third gear ratio of an original VM/VN transmission, so an increase in the final speed can only be achieved by using a longer primary drive with a lower reduction ratio. The reduction of the Pinasco gearbox is significantly shorter than the original. This enables a long primary reduction without the jump from gear three to four stalling the engine.
transmission Pinasco graduation:
1st gear: 52/13
2nd gear: 52/18
3rd gear: 47/23
4th gear: 43/27
AI-translation
+----------+
Manufacturer Information
Pinasco
Via Piemonte 5
31050 Morgano - Italy
https://www.pinasco.com/
info@pinasco.com
Responsible Person for the EU
Pinasco
Via Piemonte 5
31050 Morgano - Italy
https://www.pinasco.com/
info@pinasco.com
€879.01 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Gear box (classic scooters) | |
|---|---|
| number of teeth 1st gear: | 52 |
| number of teeth 2nd gear: | 52 |
| number of teeth 3rd gear: | 47 |
| number of teeth 4th gear: | 43 |
| number of teeth 1st gear cluster gear: | 13 |
| number of teeth 2nd gear cluster gear: | 18 |
| number of teeth 3rd gear cluster gear: | 23 |
| number of teeth 4th gear cluster gear: | 27 |
| type of teeth: | straight |
| OEM numbers (for comparison purposes only) | |
| Pinasco | 26270932 |
| Customers alternatively searched for | |
|---|---|
| Hauptwelle | Achswelle | Antriebswelle | Sekundärwelle | Hinterradachse | Achse | Ausgangswelle | Radachse | Antriebsachse | Shaft | Getriebe | Driveshaft | Set | With | Gears | Driveshaft Set With Gears | Drive Shaft Including Gear Cogs | Shaft And Gear Assembly | Arbre Secondaire Avec Pignons De Vitesse | Kit Albero Trasmis. Ruota Posteriore Compreso Ingranaggi | Kit Eje Principal Con Marchas | Tren fijo | Eje piñón primario | Eje trasero | Eje engranaje cambio | Eje secundario cambio | Eje de engranajes | | |
Related items
Pinasco
PN26530959
Intake manifold -PINASCO fits Pinasco Nordkapp 160cc cylinder only- Vespa Wideframe 125cc Vespa V1 - V15, V30 - V33, VN, VM, Vespa ACMA 125 (1951-55), Vespa Hoffmann A, B, C, M24, Motovespa 125N (V33M, V34M, V35M)
PN26530959
The item is ordered and will be in stock soon
€89.90
*
*incl. VAT plus shipping costs
Stoffi
3331290
Crankshaft -STOFFI direct intake, full circle web, stroke=57mm, reinforced conrod=110mm, conrod pin Ø=18mm, gudgeon pin Ø=15mm (needle bearing), conrod small end width 13mm- Vespa 150cc VB1T, VGL1T, VL1, VL2, VL4
3331290
The item is ordered and will be in stock soon
€219.00
*
*incl. VAT plus shipping costs
Premium Spares
3332386
Exhaust -RR-Box Road Racing- Vespa Wideframe, VM, VN, VL1T, VB1T, VGL1T - black
3332386
The item is ordered and will be in stock soon
€189.00
*
*incl. VAT plus shipping costs
RECOMMENDED
Vape
BGM945ASS
Ignition -VAPE Touring , AC- Vespa Wideframe V15T, V30T, V33T, VM1T, VM2T, VN1T, ACMA -V54, Ø98mm
BGM945ASS
The item is ordered and will be in stock soon
€339.00
*
*incl. VAT plus shipping costs
Recently viewed items