Gearbox complete incl. auxiliary shaft, main shaft, gearshift claw, gearwheels, kickstarter pinion -VMC Racing 5 speed- Vespa V50, V90, 50N, PV125, ET3, SS50, SS90, PK S, PK XL1, PK XL2, ETS - (11/56-15/53-18/50-20/47-22/46 teeth) | Gear boxes | Gear box | Engines

Preview: Gearbox complete incl. auxiliary shaft, main shaft, gearshift claw, gearwheels, kickstarter pinion -VMC Racing 5 speed- Vespa V50, V90, 50N, PV125, ET3, SS50, SS90, PK S, PK XL1, PK XL2, ETS - (11/56-15/53-18/50-20/47-22/46 teeth)

Description

VMC Sport Gearbox 5-GANG Vespa Smallframe

The VMC 5-speed transmission is a wonderful option to make engines with peaked power characteristics very drivable. For this purpose, the transmission has been completely redesigned and sensibly graduated. The spread (bandwidth) of the transmission has been slightly reduced, so the gears are closer together.

STEPS

VMC gear 1+2 => longer than Piaggio gear 1+2

VMC gear 3+5 => same length as Piaggio gear 3+4

VMC gear 4 => between Piaggio gear 3+4

The first gear is already usable as a full driving gear (not only for starting) due to the extension. The higher the gear is selected the lower the gear jump. This gives you a very nice driveable engine that does not fall out of the power band even at high speeds. On the other hand, in case of increased driving resistance (incline, strong headwind), you can simply shift down a gear without the engine overrevving.

The transmission is delivered as follows:

Reinforced VMC wheel axle incl. rear wheel nut
6-arm gearshift claw with reinforced spring and 2 balls
5 special gears with 56/53/50/47/46 teeth
PTO shaft with 5 gears 11/15/18/20/22 incl. special mounting nut
Special kickstarter pinion (only suitable for VMC 5 speed gearbox)
Set of washers for correct alignment and clearance removal
Washer and Seeger seal

Fits original Piaggio crankcases as well as engine cases from other manufacturers that use the original gearbox. The auxiliary shaft uses the conventional clutch cone that fits all clutch hubs on the market.

The gearbox has been tested with powerful engines, but due to the necessary narrower components, we recommend its use in engines up to 25HP.
For assembly, please refer to the enclosed assembly instructions.

_{AI-translation}

+----------+
Manufacturer Information
Avotecnica
Via Roma 166, Box 2
36050 Bressanvido, VI - Italy
https://avotecnica.com/
info@avotecnica.com

Responsible Person for the EU
Avotecnica
Via Roma 166, Box 2
36050 Bressanvido, VI - Italy
https://avotecnica.com/
info@avotecnica.com

€787.99 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)

P For this item you get fidelity point/s

OEM numbers (for comparison purposes only)
Avotecnica	003610
VMC	003610

Customers alternatively searched for
Gang \| Set \| Gangsatz \| Zahnräder \| Gangrad \| Getriebe \| Getrieberad \| Zahnrad \| Getriebezahnrad \| Schaltung \| Gangzahnrad \| Gear \| Set \| Getriebe \| Getriebeset \| Schaltklaue \| Schaltkreuz \| Schaltrasterung \| Schaltspinne \| Gangspinne \| Gear \| Selector \| Gangarmgear \| Sélecteur De Vitesses \| Leva Selettrice \| Garra De Embrague \|