Gear cluster -BGM PRO Touring- Vespa V50, PV125, ET3, PK50, PK80, PK125 S-XL - 10-14-18-21 teeth (used with genuine gear box, short 4th gear) | Gear boxes | Gear box | Engines

Preview: Gear cluster -BGM PRO Touring- Vespa V50, PV125, ET3, PK50, PK80, PK125 S-XL - 10-14-18-21 teeth (used with genuine gear box, short 4th gear)

Description

BGM Pro auxiliary shaft 'made in Europe' for Vespa Smallframe.

BGM Pro transmission parts are ultrasolid material. For the highest stresses, the auxiliary shafts are manufactured in Europe from high-alloy NiCrMo case-hardened steel (14NiCrMo13).
The precisely machined, very tough and strong steel is then hardened at thyssenkrupp and is thus ready for the highest engine outputs. To guarantee exactly this, BGM transmission parts are subjected to extensive testing.

TESTING LABORATORY
Pulsation tests in a German test laboratory, in which we compared the very stable old original Piaggio auxiliary shafts with our BGM prototypes, resulted in a 50% higher load capacity of the BGM PRO auxiliary shaft. The precisely defined surface hardening to 58-60HRC also makes the pinions extremely resistant to wear. Better than Piaggio goods. Always consistent high quality. No compromises.

USE
Usable for all types of use, whether tourer or hardcore racer.
They harmonize perfectly with the BGM PRO gear wheels for Vespa Smallframe.
The BGM PRO slave shafts are available in three gradations:

Article	Usage	Gear1	gear2	gear3	Gear4
BGM01822	Standard	10	14	18	22
BGM01821	Sports	10	14	18	21
BGM01720	Race	10	14	17	20

STANDARD STEPS (BGM01822)
The standard steps correspond exactly to the original Piaggio gearbox as it was installed in almost all 50-125cc smallframe engines from the factory. Can be used with the original gears (Z 58-54-50-46) or combined (alternatively to BGM01821) with a short 4 speed (Z 48).

SPORT DISTANCE (BGM01821)
For sportier setups that require a tighter gear connection between gears 3 and 4, BGM01821 is ideal. Here the fourth gear is one tooth shorter so the engine is always perfectly in the powerband when shifting from 3 to 4. Very popular when using a strong resonance exhaust with a tuning cylinder.
Very good alternative to a short 4 gear (Z48) since fewer teeth always result in a more stable gear/outdrive shaft (wider tooth base). Used with the original gear wheels (Z 58-54-50-46).

RACE STEP DOWN (BGM01720)
Here the third gear is already one tooth shorter, the fourth gear already two teeth shorter. These short gear jumps make it possible to always stay perfectly within the power band of a high-revving engine. For street use, this is usually combined with a longer primary reduction to achieve a sufficiently high top speed. Gears 1-2 are then already correspondingly long and already usable as full gears. Used with the original gear wheels (Z 58-54-50-46)

FIT
The BGM PRO auxiliary shaft fits in all Smallframe engines with four-speed gearbox.

EXCEPTIONS
The so-called moped gearboxes (so-called 'Austria gearboxes') are an exception.
The Austrian mopeds have a longer secondary gear.
Here it is possible to convert to the BGM Pro auxiliary shaft if the gearwheels are also exchanged. This gearbox was also used on vehicles for other markets (e.g. Portugal).
Also excluded are the vehicles V50 1°series (V5A1T) with 1° series engine (V5A1M up to engine number 92876): These engines have a narrower engine housing as well as a narrower main shaft. Conversion is not possible here.

CONCLUSION: Very stable gear components with an excellent price-performance ratio.

_{AI-translation}

This item is currently not available.

€99.00 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon

P For this item you get fidelity point/s

OEM numbers (for comparison purposes only)
BGM PRO	BGM01821

Please inform me once the product is available again.

Customers alternatively searched for
Nebenwelle \| Getriebe \| Vorgelegewelle \| Tannenbaum \| Christmastree \| Tree \| Christmas \| Vorgelege \| Input Gear Cluster \| Christmas Tree \| Primary Gear Cluster \| Arbre \| Albero Primario \| Eje Secundario \| Tren fijo \| Eje piñón primario \|

Available versions

Part no.:	Number of teeth	Price	Stock	Cart	Save
Part no.: BGM01720	Number of teeth 10-14-17-20 teeth	Price €99.00	Stock Available immediately (delivery time 1-3 working days*)	Cart	Save
Part no.: BGM01821	Number of teeth 10-14-18-21 teeth	Price €99.00	Stock The item is ordered and will be in stock soon	Cart	Save
Part no.: BGM01822	Number of teeth 10-14-18-22 teeth	Price €99.00	Stock Available immediately (delivery time 1-3 working days*)	Cart	Save