Front brake hub 8 inch incl. brake shoes -BGM PRO cast iron- Vespa Wideframe V1-15, V30-33, VU, VM, VN, VL, VB, ACMA, Hoffmann, Largeframe VBA, VBB, VNA, VNB

Preview: Front brake hub 8 inch incl. brake shoes -BGM PRO cast iron- Vespa Wideframe V1-15, V30-33, VU, VM, VN, VL, VB, ACMA, Hoffmann, Largeframe VBA, VBB, VNA, VNB

Description

Brake drum front 8" incl. brake shoes -BGM PRO cast iron- Vespa Wideframe V1-15, V30-33, VU, VM, VN, VL, VB, VBA, VBB, VNA, VNB, ACMA, HoffmannBrake drum

front "Made in Germany" by Strohspeed for BGM PRO.
Fits all Vespa models with 8 inch tires (not Vespa Super VNC/VBC).

Made of high quality cast iron, it offers enormous advantages over conventional brake drums made of thin sheet steel:

suitable for original and tubeless rims
no distortion due to hot brakes
perfect concentricity due to exact centering over the wheel shaft (tol. 0.02mm!)
never again brake rubbing
much better heat dissipation through the cooling fins
much more stable due to larger overall wall thickness
additional reinforcement by cooling fins
no brake fading under continuous load (temperature max. 200-240°)

With this brake drum, even an 8 inch Vespa finally brakes really well!

Note: The brake drums are oiled to protect against corrosion. Please remove the oil before mounting (e.g. with brake cleaner, see accessories). Like all cast iron brake drums, they will corrode if they are not protected and exposed to moisture. For protection, the outside of the brake drum can be coated with heat-resistant exhaust paint. This will keep the drum looking good for a long time

Quote Zini, Stoffis Garage:
Brake drum works great!!!!!!!!! Bin Vespina driven (with defective WDR rear and very bad rear brake), are there in the mountains around, times just under 1000 meters altitude in one by down and all with the front brake, no overheating, super braking power, full cool!!!!!!!!!

_{AI-translation}