Write a review
Evaluations will be activated after verification.
Item successfully added.
Front brake hub 8 inch -BGM PRO cast iron- Vespa Wideframe V1-15, V30-33, VU, VM, VN, VL, VB, ACMA, Hoffmann, Largeframe VBA, VBB, VNA, VNB
Part no.:
BGM5300
Description
Brake drum front 8" -BGM PRO grey cast iron Vespa Wideframe V1-15, V30-33, VU, VM, VN, VL, VB, VBA, VBB, VNA, VNB, ACMA, Hoffmann
brake drum front "Made in Germany" by Strohspeed for BGM PRO.
Fits all Vespa models with 8 inch tyres (not Vespa Super VNC/VBC).
Made of high quality cast iron, it offers enormous advantages compared to conventional brake drums made of thin sheet steel:
- suitable for original and tubeless rims
- no distortion due to hot brakes
- perfect concentricity due to exact centering over the wheel shaft (tol. 0.02mm!)
- no more brake rubbing again
- clearly better heat dissipation through the cooling fins
- substantially more stable due to greater overall wall thickness
- additional reinforcement through cooling fins
- no brake fading under permanent load (max. temperature 200-240°)
With this brake drum even an 8 inch Vespa finally brakes really well!
Note: The brake drums are delivered oiled to protect against corrosion. Please remove the oil before assembly (e.g. with brake cleaner, see accessories). As with all cast iron brake drums, they corrode if they are not protected and get damp. For protection, the outside of the brake drum can be coated with heat-resistant exhaust paint. Thus the drum remains also optically durably beautiful.
quote Zini, Stoffis Garage:
Brake drum works super!!!!!!!!
€89.90 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| OEM numbers (for comparison purposes only) | |
|---|---|
| BGM PRO | 5300 |
| Customers alternatively searched for | |
|---|---|
| Bremstrommel | Vorne | Trommel | Bremse | Front | Brake | Hub | Tambour De Frein Avant | Tamburo Freno Anteriore | Tambor De Freno Delante | | |
Brake drum front 8" -BGM PRO grey cast iron Vespa Wideframe V1-15, V30-33, VU, VM, VN, VL, VB,...Continue reading
Fits the following vehicles
- Vespa (A.C.M.A.) Vespa 125 (1950, No. -1110)
- Vespa (A.C.M.A.) Vespa 125 (1951, No. 1111-3310)
- Vespa (A.C.M.A.) Vespa 125 (1952, No. 3311-35610)
- Vespa (A.C.M.A.) Vespa 125 (1953, No. 35611-70190)
- Vespa (A.C.M.A.) Vespa 125 (1954)
- Vespa (A.C.M.A.) Vespa 125 (1955)
- Vespa (A.C.M.A.) Vespa 125 (1956)
- Vespa (A.C.M.A.) Vespa 125 (1957-58)
- Vespa (Augsburg) Vespa 125 (type 152, VNA1T)
- Vespa (Augsburg) Vespa 125 T/1 (type 222, VNA2T)
- Vespa (Augsburg) Vespa 125 T/2 (type 232, VNB1T)
- Vespa (Augsburg) Vespa 125 T/2 (type 392, VNB3T)
- Vespa (Augsburg) Vespa 125 T/2 (type 392, VNB4T)
- Vespa (Hoffmann) Vespa 125 (A)
- Vespa (Hoffmann) Vespa 125 (HA)
- Vespa (Hoffmann) Vespa 125 (HB)
- Vespa (Hoffmann) Vespa 125 (HC)
- Vespa (Hoffmann) Vespa 125 (HC) Königin
- Vespa (Motovespa) Vespa 125 N (engine V33M)
- Vespa (Piaggio) Vespa 125 (V15T)
- Vespa (Piaggio) Vespa 125 (V1T)
- Vespa (Piaggio) Vespa 125 (V30T)
- Vespa (Piaggio) Vespa 125 (V33T)
- Vespa (Piaggio) Vespa 150 (VBA1T)
- Vespa (Piaggio) Vespa 150 (VBB1T)
- Vespa (Piaggio) Vespa 150 (VBB2T)
- Vespa (Piaggio) Vespa 150 (VL1T)
- Vespa (Piaggio) Vespa 150 (VL2T)
- Vespa (Piaggio) Vespa 125 (VM1T)
- Vespa (Piaggio) Vespa 125 (VM2T)
- Vespa (Piaggio) Vespa 125 (VN1T)
- Vespa (Piaggio) Vespa 125 (VN2T)
- Vespa (Piaggio) Vespa 125 (VNA1T)
- Vespa (Piaggio) Vespa 125 (VNA2T)
- Vespa (Piaggio) Vespa 125 (VNB1T)
- Vespa (Piaggio) Vespa 125 (VNB3T)
- Vespa (Piaggio) Vespa 125 (VNB4T)
- Vespa (Piaggio) Vespa 125 (VNB5T)
- Vespa (Piaggio) Vespa 125 (VNB6T)
- Vespa (Piaggio) Vespa 125 U (VU1T)
- Vespa (Piaggio) Vespa 125 (VNB2T)
Blog
Ratings
From:
Stefan Auer
On:
10 Aug 2019
Ich habe jetzt eine Vorderradbremse!!
Kann mich den Vorrednern nur anschliessen! Meine Originalbremse vorne an meiner VBA1T '59 war bisher eher von symbolischer Bedeutung... Heute die Strohspeed-Trommel eingebaut, zusammen mit neuen Piaggio-Bremsbelägen. Und siehe da: Ich habe jetzt eine Vorderradbremse!! Und erst noch eine fein dosierbare, aber wahnsinnig effektive! Das ist nun mal jetzt ein ganz anderes Fahren - ohne immer 50m Abstand halten zu müssen :-)
Werde die Hinterradbremse demnächst auch ersetzen.
From:
G.S.
On:
13 Jun 2019
Bgm Bremstrommel 8 zoll
Wahnsinn! Seit über 15 Jahren ärgere ich mich über Bremsenrubbeln und schlechter Bremswirkung bei meiner VBA. Habe vorne und hinten die BGM-Trommeln montiert und plötzlich ein neues Moped unterm Hintern!
From:
customer
On:
17 Feb 2018
Sollte an jeden 8"er
From:
customer
On:
26 Jul 2017
Steigert die Bremsleistung und mindert das Fading bei den 8" Modellen.
Related items
variants
Motip
3390010
Exhaust paint -650°C- 400ml - colourless
3390010
further versions from €15.95
-
Available immediately (delivery time 1-3 working days*)silver
-
Available immediately (delivery time 1-3 working days*)transparent colourless
Normfest
3600011
Copper compound -NORMFEST- 100g
3600011
The item is ordered and will be in stock soon
€10.90
*
Unit
0.1 kg
(€109.00
* / 1 kg)
*incl. VAT plus shipping costs
Alternative items
OEM-Qualität
9010068
Front brake hub 8 inch -OEM QUALITY- Wideframe VN1, VL, VB1T, Largeframe VNA1T, VNA2T, VNB, VBA1T, VBB1T, VBB2T
9010068
The item is ordered and will be in stock soon
€34.95
*
*incl. VAT plus shipping costs
Recently viewed items