Front brake cable -PIAGGIO- Vespa PX (-1984)

Preview: Front brake cable -PIAGGIO- Vespa PX (-1984)

Description

Original Piaggio brake cable for the front brake of the PX models with small 16mm front axle (used until 1983). In the handlebars the outer shell is supported by an abutment, which is included in the delivery of the cable. The Bowden cable (pull cable) itself is fixed to the pear-shaped end of the cable in the lever with an attached adapter.

TIP: Before fixing the cable to the clamping plate, screw in the adjusting screw for the outer casing of the cable at the brake anchor plate (behind the shock absorber). Grease the pull rope a little bit before mounting to achieve lowest possible operating forces.

_{AI-translation}

€36.00 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)

P For this item you get fidelity point/s

Colour
main colour:	silver
Transmission cables
calbe type:	complete
inner cable type:	plaited
diameter inner cable:	1.9 mm
diameter outer cable:	5.8 mm
outer cable Teflon ® coated:
length inner cable:	133 cm
length outer cable:	113 cm
dimensions upper terminal:	6,0 x 9,0 [mm]
dimensions lower terminal:	ohne
OEM numbers (for comparison purposes only)
Piaggio	174164, 179347, 90422

Customers alternatively searched for
Bremszug \| Bremskabel \| Bremsseil \| Vorne \| Hülle \| Bremse \| Front \| Brake \| Cable De Frein Avant \| Trasmissione Anteriore \| Cable De Freno Delante \|