Write a review
Evaluations will be activated after verification.
Item successfully added.
Front axle drum brake incl. Nuts -BGM PRO- Lambretta LI, LIS, SX, TV, DL, GP, J , Lui, LD (1957)
Part no.:
BGM7890EKT
Description
Together with MMW we have finally designed the bgm PRO version of a hydraulic disc brake. The look is very subtile for a hydraulic disc brake and mostly determined by the use of a modified original front brake hub.
The braking power however is second to none. The combination of the caliper with its massive four pistons and the large diameter brake disc (220 mm) gives a second to none braking power.
The Antidive system adds this and as the name suggests the diving of the front end on braking is an issue of the past.
All CNC parts are machined from billet in Germany. The total quality of the item leaves nothing to be desired.
The brake unit comes pre-assembled to make you the final assembly easier. It is pre-assembled only, because most of the drum brakes will be painted to be matched to the colour or colour scheme of your Lambretta. The original speedo drive is used with this kit. All needed small parts are included. The oil seals and bearings are of European origin (like FAG or SKF for instance).
The threads of the drum are reinforced.
If you fit Antidive disc brakes to disc brake forklinks these are a straight fit. On all drum link fork links the pivot on the RHS needs to be cutted away. Otherwise the Antidive system will not work.
The Antidive leg should sit at an angle of 90° to the fork.
With some aftermarket rims (especially tubeless ones) there won’t be space between the wheel rim and the caliper. Here you normally can take material off the brake caliper for enough clearance. The tyre size shouldn’t be larger than 3.50-10.
The braking power however is second to none. The combination of the caliper with its massive four pistons and the large diameter brake disc (220 mm) gives a second to none braking power.
The Antidive system adds this and as the name suggests the diving of the front end on braking is an issue of the past.
All CNC parts are machined from billet in Germany. The total quality of the item leaves nothing to be desired.
The brake unit comes pre-assembled to make you the final assembly easier. It is pre-assembled only, because most of the drum brakes will be painted to be matched to the colour or colour scheme of your Lambretta. The original speedo drive is used with this kit. All needed small parts are included. The oil seals and bearings are of European origin (like FAG or SKF for instance).
The threads of the drum are reinforced.
- FEATURES:
- Massive brake disc with 220 mm diameter
- Four piston caliper (not included)
- Anti-Dive
- Original drum brake used, reinforced on studs
- Made in Germany
- CNC parts are machined from billet
- Pre-mounted to make final assembly easier
If you fit Antidive disc brakes to disc brake forklinks these are a straight fit. On all drum link fork links the pivot on the RHS needs to be cutted away. Otherwise the Antidive system will not work.
The Antidive leg should sit at an angle of 90° to the fork.
With some aftermarket rims (especially tubeless ones) there won’t be space between the wheel rim and the caliper. Here you normally can take material off the brake caliper for enough clearance. The tyre size shouldn’t be larger than 3.50-10.
€29.90 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Customers alternatively searched for | |
|---|---|
| Scheibenbremse | Set | Scheibenbremse | Umrüstkit | Umrüstset | Grimeca | Bremsscheibenumrüstset | Hydraulik | Hydraulisch | Vollhydraulik | Vollhydraulisch | Bremsscheibenumrüstkit | Bremsscheibenkit | Bremsscheibenset | Bremse | Bremsenumrüstung | Bremsenkit | Bremsensetdisc | Brake | Disc Brake Kit | Disc Brake Set | Disk Brake Set | Hydrualic Brake Conversion | Frein À Disque | Freno A Disco | Freno De Disco | | |
Recently viewed items