Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Exhaust -EGIG PERFORMANCE Superbanana Touring Ø=32mm (54-62mm stud spacing) - Vespa ET3, PV125

3334004
Exhaust -EGIG PERFORMANCE Superbanana Touring Ø=32mm (54-62mm stud spacing) - Vespa ET3, PV125
Exhaust -EGIG PERFORMANCE Superbanana Touring Ø=32mm (54-62mm stud spacing) - Vespa ET3, PV125
Exhaust -EGIG PERFORMANCE Superbanana Touring Ø=32mm (54-62mm stud spacing) - Vespa ET3, PV125
Exhaust -EGIG PERFORMANCE Superbanana Touring Ø=32mm (54-62mm stud spacing) - Vespa ET3, PV125
Exhaust -EGIG PERFORMANCE Superbanana Touring Ø=32mm (54-62mm stud spacing) - Vespa ET3, PV125

Description


Sport exhaust EGIG PERFORMANCE 'Super Banana TOURING' for Vespa Smallframe PV125/ET3

The Superbanana from EGIG PERFORMACE is a resonance exhaust, based on the look of a conventional banana exhaust, as already used by Piaggio from the factory on the popular SS50/90 and ET3 models. The Superbanana is designed to provide powerful engines from 125cc upwards with an exhaust that is visually and acoustically unobtrusive, but performs at the level of a classic resonance exhaust.

NOISEREDUCTION
Inside there is a silencer that reduces the noise level to the lowest possible level without causing any loss of power or heat build-up. The difference in noise compared to an original or other classic 'banana' is only a few DB more, with +50% or more power increase, depending on the engine type.

FEATURES SUPER BANANA TOURING

  • One piece exhaust

  • Overcurrent angle: 120°-125

  • Exhaust angle: 170°-180°

  • Advance exhaust angle: 27-29°

  • Manifold Ø32mm

  • Luggage compartment compatible

  • Tires up to 3.50 width

  • Stud spacing 54-62mm*

  • not suitable for Vespa PK (with cutting out the side plate mounting also possible on PK models)

If the Superbanana is installed on 54mm, the M8 flanged nut with 10mm wrench width on the inside of the manifold must be used.

The Superbanana exhausts are designed as a final upgrade for fast street engines. They therefore need the right environment to deliver the appropriate performance. If the engine is still stock (or despite 133cc cylinders rather conservatively built) the exhaust can only support limited. Here we would rather advise a BGM Touring or BGM Sport Banana, as these can support the engine much better in such an environment.
However, if the conditions are right (cylinder, intake revision, carb size etc.) the Superbanana currently offers the highest performance increase that can be achieved with an inconspicuous exhaust system.

To meet different requirements, there are two different types, the Sport and Touring versions.

TOURING
The Touring version is a 'real banana' and scores with good driveability due to the relatively early high torque. In the upper speed range it still has a lot of reserves to complete fast stages on the motorway.
The power peak is, depending on cylinder and exhaust angle, between 7000-8000 rpm and thus about 1500 rpm later than a conventional sport banana. It therefore feels comfortable on engines with not too high timing angles (overflow max. 125°, exhaust ~170-180° advance angle between 27-29°) and is perfect for touring engines based on a Polini 133 or e.g. also a M1B 60. The Touring is comparable e.g. with Egig Python or PM40.

SPORT
The Superbanana Sport has a larger diffuser and was developed for powerful engine concepts. Therefore, for best results, it is used with higher control angles than the Touring. The overflow angle should be around 126-128°, the advance angle between 29-32° resulting in a window for the exhaust angle of about 184-192°. With this the Sport then burns off a real firework and peaks, depending on the setup, between 8000-9000rpm with a good usable overrev of mostly over 2000rpm.
So don't get too confused by the build, the Superbanana Sport is a 'whole dude' and plays in the same league as Egig Mamba or Viper resonance exhaust.

The manifolds of the Superbanana Sport and Touring are identical, so this can be converted in a few minutes if necessary.

The exhaust should be oiled regularly to protect it from rust.
Alternatively, it can be painted with heat resistant paint or electroplated.

NOTE: The exhaust manifold may contact the shock spring. To ensure adequate clearance, we recommend using CMD's 'Joe Possum' shock absorber adapter (see accessories).


CONCLUSION
The EGIG PERFORMANCE SUPERBANANA exhausts are perfect for inconspicuous but powerful smallframe engines. They score with high performance, good drivability and a wide rev band.

AI-translation

 
€266.11 * €299.00 * (11% off)

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
 
Customers alternatively searched for
Auspuff | Rennauspuff | Sportauspuff | Schalldämpfer | Resonanzkörper | Pott | Endtopf | Abgasanlage | Exhaust | Tuningexhaust | Sportexhaust | Racingexhaust | Tuning | Sport | Racing | Pipe | Expansion Chamber | Silencer | Muffler | Pot D'Échappement | Marmitta | Escape | échappement de course | échappement de compétition | pot d'échappement de course | escape deportivo | escape de competición | escape de carreras | scarico da corsa | scarico da corsa | scarico da competizione | scarico da corsaSiluro

Alternative items


Exhaust -GIANNELLI banana- Vespa PV125, ET3 125
Gianelli
7671925
Gianelli
Exhaust -GIANNELLI banana- Vespa PV125, ET3 125
Available immediately (delivery time 1-3 working days*)
€105.87 *
*incl. VAT plus shipping costs
Exhaust -POLINI Sport banana- Vespa PV125, ET3 125
Polini
1010010
Polini
Exhaust -POLINI Sport banana- Vespa PV125, ET3 125
Available immediately (delivery time 1-3 working days*)
€123.71 *
*incl. VAT plus shipping costs
Exhaust-BGM PRO banana SPORT- Vespa PV125, ET3 125 - black
bgm Pro
BGM1125SP
bgm Pro
Exhaust-BGM PRO banana SPORT- Vespa PV125, ET3 125 - black
Available immediately (delivery time 1-3 working days*)
€132.61 *
*incl. VAT plus shipping costs

Ersatzteile


Exhaust spring -BGM ORIGINAL- Anti Rattle stainless steel - 70mm
variants bgm Original
BGM0903
bgm Original
Exhaust spring -BGM ORIGINAL- Anti Rattle stainless steel - 70mm
further versions from €3.91
  • Available immediately (delivery time 1-3 working days*)
    50mm
  • Available immediately (delivery time 1-3 working days*)
    55mm
  • Available immediately (delivery time 1-3 working days*)
    60mm
  • Available immediately (delivery time 1-3 working days*)
    70mm
Exhaust inner pipe -BGM PRO banana SPORT/TOURING- Vespa V50, V90, SS50, SS90, PV125, ET3
bgm Pro
BGM1125BP
bgm Pro
Exhaust inner pipe -BGM PRO banana SPORT/TOURING- Vespa V50, V90, SS50, SS90, PV125, ET3
Available immediately (delivery time 1-3 working days*)
€22.16 *
*incl. VAT plus shipping costs
Recently viewed items