Write a review
Evaluations will be activated after verification.
Item successfully added.
Engine repair kit -LAMBRETTA XXL- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP - oil seals Jockeys Boxenstop
Part no.:
3333089JB
Description
Engine Revision Set Lambretta XXL
We offer you two revision sets for your Lambretta engine. In the large set you will find all the parts you need to fit a bare engine housing with bearings, studs, shaft seals, silent blocks and bushings. Or to rebuild an old engine case completely new.
are included in the delivery:
1. complete engine bearing set and bearing bushes dl/GP. It can also be used for the Li/SX models if the spacer ring is not installed in the maghousing. In this case the wider NU2205 bearing of the dl/GP will fit the earlier models.
6305 ball bearing drive side crankshaft - SKF or FAG
NU2205 ball bearing alternator side - SKF or FAG
ball bearing rear wheel - bgm PRO
6004 Ball bearing auxiliary shaft - SKF or FAG
Coupling bush dl/GP - bgm PRO
Needle bearing -K- (24x28x10 mm) Spider/pinion LI/SX/TV/GT (2 pieces) - SKF or FAG
needle bearing -K- (16x22x12 mm) Auxiliary shaft/motor housing - SKF or FAG
needle bearing -K- (20x24x10 mm) Main shaft/gearbox cover plate - SKF or FAG
bearing bush auxiliary shaft
washer auxiliary shaft
washer needle bearing main shaft/gear 1.
2. Fits 125, 150, 175 and 200 cc. MB Developments. All used circlips except the one in the maghousing (Art. No. 8002140).
4. Complete O-Ring Set MB Developments. For main shaft, rear brake arm, shift and clutch shaft.
5. All bushings: shift shaft, kick starter inside and outside.
6. All engine studs, dowel pins, grease nipples:
complete stud bolt set Engine cover fits Series 1-3 - bgm PRO
complete stud bolt set Gearbox cover plate - MBD
stud bolt M6 x 25 mm Fan wheel housing - 3 pieces
stud bolt M6 x 21 mm Cover plate Rear wheel bearing - 4 pieces
stud bolt M6 x 28 mm chain tensioner - 2 pieces
mating pins motor housing and gearbox cover plate - 4 pieces
lubrication nipple M8 x 1,25 brake arm - 1 piece
7. Disk kick starter shaft MBD in 1.0 mm and 1.5 mm for spacing the kick starter shaft out on the outside of the engine cover
8. kick starter piston bolt MB Developments
9. silent block set bgm PRO
10. pressure plate set for the chain tensioner.
11. screw hexagon socket M6 x 16 mm (4 pcs.) to fix the cover plate for the 6305 bearing on the drive side.
12. L-ring impeller housing
13. all oil plugs: check, drain, vent - Casa Lambretta
14. screw M6 x 18 mm -ISO 7380- with flat hexagon socket head for fixing the shift fork plus M6 spring washer corrugated
15. Gearbox shims bgm PRO in 2.00 mm, 2.20 mm and 2.40 mm and 2.60 mm.
16. Clutch nut M14 x 1.5
17. Clutch nut locking plate
18. Clutch compensating washers set bgm PRO (0.8 mm, 1.0 mm, 1.2 mm, 1.4 mm and 1.6 mm)
19. Shift spring SIL
20. switching ball Ø=7.9 mm - 2 pieces
21. half moon wedge fan wheel
22. cable clamping plate in maghousing - MBD
23. screw set maghousing/cylinder cover - MBD
24. M6 washers - 100 pieces - in set of 100 cheaper
25. M6 stop nuts - 100 pieces - in a set of 100 pieces cheaper
With the shaft seal set you can choose between MB Developments (inner crankshaft seals made of FPM), Jockeys Boxenstop (inner crankshaft seals made of FPM) and Casa Lambretta (all shaft seals made of FPM).
Some parts are not included in the kit as the choices are too wide. This concerns parts for the clutch revision, the front sprocket, the chain tensioner, the chain, the cover plate for the 6305 bearing, cylinder studs, kick starter shaft, the shift claw and the adjusters on the engine.
AI-translation
This item is currently not available.
€557.00 *
incl. VAT plus shipping costs
The item is ordered and will be in stock soon
P
For this item you get
fidelity point/s
Please inform me once the product is available again.
| Customers alternatively searched for | |
|---|---|
| Motorrevisions | Set | Revisionsset | Revisionskit | Lagersatz | Instandsetzung | Motorinstandsetzung | Motorinstandsetzungsset | Motorinstandsetzungkit | Motorinstandssetzungkit | Motorüberholung | Überholen | Motorüberholen | Motor | Instandsetzen | Warten | Revidieren | Revision | Öffnen | Reparieren | Reparaturkit | Motorreparaurkit | Motorreparaturset | Motorüberholset | Motorüberholkit | Motorreparatur | Motorkit | Motorset | Motorservice | Engine | Overhaul | Kit | Engine Overhaul Kit | Engine Rebuild Kit | Motor Refurb Set | Engine Repair Kit | Kit De Révision Moteur | Kit De Reacondicionamiento General Del Motor e Revisione Kit | Bourrage | | |
Available versions
Recently viewed items