Write a review
Evaluations will be activated after verification.
Item successfully added.
Engine gasket set -ATHENA- Piaggio APE175-AD1-400
Part no.:
9110035
Description
All engine gaskets should always be replaced during an overhaul. The easiest way to do this is to lubricate the gaskets with a little grease to make them stick to the housing and prevent them from being bent or damaged during installation. Sealing compound is only necessary if the housing is defective (scores in the sealing surface or similar). If a healthy motor housing drips nevertheless, it is usually strained or crooked. A strained housing is caused by unevenly tightened housing screws. Ideally the housing halves should be tightened evenly (crosswise!) with a torque wrench. The maximum value here is 6-8NM according to Piaggio - specification. A crooked housing is also often the cause of dripping motors. Mostly these are motors that have been welded before. Only a few specialist welding companies take care of a technically correct preheating and cooling of the housing. The biggest mistake is to make a welding operation on individual halves. Whenever possible, both halves should be held together with all motor bolts! Another common cause for leaking engines are defective O-rings. Small rubber rings, usually located in a groove made for them, they seal corresponding components in the same way as the shaft seals.
AI-translation
+----------+
Manufacturer Information
Athena
Via delle Albere 13
36045 Alonte, Vicenza - Italy
https://www.athena.eu/
info@athena.eu
Responsible Person for the EU
Athena
Via delle Albere 13
36045 Alonte, Vicenza - Italy
https://www.athena.eu/
info@athena.eu
AI-translation
+----------+
Manufacturer Information
Athena
Via delle Albere 13
36045 Alonte, Vicenza - Italy
https://www.athena.eu/
info@athena.eu
Responsible Person for the EU
Athena
Via delle Albere 13
36045 Alonte, Vicenza - Italy
https://www.athena.eu/
info@athena.eu
€15.40 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Gaskets | |
|---|---|
| number of gasskets: | 12 |
| o-rings incl.: | |
| oil seals incl.: | |
| head gasket incl.: | |
| base gasket incl.: | |
| reed valve gasket incl.: | |
| valve stem seals incl.: | |
| squeeze-type gasket incl.: | |
| Customers alternatively searched for | |
|---|---|
| Dichtsatz | Motor dichtsatz | Motorblockdichtungen | Motorblockdichtsatz | Komplettdichtsatz | Kompletter | Komplettsatz | Dichtungen | Dichtsatz | Motorgehäusedichtungen | Gasket | Set | Engine | Sealer | Covering | Sealing | Packing | Pochette De Joints Moteur | Guarnizioni Kit Motore | Kit De Juntas Para Motor | Empaquetadura | | |
Related items
Normfest
7675222
Liquid gasket -NORMFEST Plastomar- 85 g
7675222
The item is ordered and will be in stock soon
€15.29
*
Unit
0.08 l
(€191.13
* / 1 l)
*incl. VAT plus shipping costs
Recently viewed items