Write a review
Evaluations will be activated after verification.
Item successfully added.
engine complete -101 OCTANE- short version for rear drum brake, 743mm drive belt for GY6 125cc 152QMI
Part no.:
IP15488
Description
Complete replacement engine for maxi scooter with 125cc GY6 4-stroke engine 152QMI with short engine block, short gearbox output shaft and rear drum brake. For the short engine block a 743mm V-belt is needed. The engine length can be determined by the distance from the crankshaft (variator) to the transmission input shaft (clutch bell). This distance is about 23cm for the replacement engine. The engine is supplied complete with drive, alternator, etc. and is ready for installation.
Deviations may occur with the gearbox output shaft. There are two variants: Engine with short or long output shaft (the shaft on which the rear wheel is mounted). The short output shaft is used on vehicles with one rear shock absorber, and the long shaft is used on vehicles with two rear shock absorbers. If the other shaft is needed, it can easily be taken from the original engine.
Important! Check the oil level in the gearbox and engine after assembly. Due to the oil quality of Chinese manufacturers, we recommend to change the oil after 50km break-in time. The valve clearance should also be checked. Both valves should be set to a dimension of 0.08mm.
Overall, this complete engine offers a cost-effective alternative to complex and expensive repairs.
The replacement of the complete engine should generally only be carried out by specialist workshops.AI-translation
Deviations may occur with the gearbox output shaft. There are two variants: Engine with short or long output shaft (the shaft on which the rear wheel is mounted). The short output shaft is used on vehicles with one rear shock absorber, and the long shaft is used on vehicles with two rear shock absorbers. If the other shaft is needed, it can easily be taken from the original engine.
Important! Check the oil level in the gearbox and engine after assembly. Due to the oil quality of Chinese manufacturers, we recommend to change the oil after 50km break-in time. The valve clearance should also be checked. Both valves should be set to a dimension of 0.08mm.
Overall, this complete engine offers a cost-effective alternative to complex and expensive repairs.
The replacement of the complete engine should generally only be carried out by specialist workshops.
€545.92 *
incl. VAT plus shipping costs
Item is available and will be ordered for you (delivery time 2-5 working days for instant payment with credit card or Paypal)
P
For this item you get
fidelity point/s
| Customers alternatively searched for | |
|---|---|
| Motor | Motor | Triebwerk | Motorblock | Komplettmotor | Kompletter | Block | Antriebseinheit | Motor | Rollermotor | Ersatzmotor | Tauschmotor | Aggregat | Murl | Maschine | engine | motor | Moteur | motore | | |
Recently viewed items