Write a review
Evaluations will be activated after verification.
Item successfully added.
engine complete -101 OCTANE- long version for rear drum brake, 835mm drive belt for GY6 125cc 152QMI
Part no.:
IP15481
Description
Complete replacement engine for 125cc GY6 4-stroke engines 152QMI with long engine block, long gearbox output shaft and rear drum brake. For the long engine block a 835mm V-belt is needed. The engine length can be determined by the distance from the crankshaft (variator) to the transmission input shaft (clutch bell). This distance is about 28cm for the replacement engine. The engine is supplied complete with drive, alternator, etc. and is ready for installation.
Deviations may occur with the gearbox output shaft. There are two variants: Engine with short or long output shaft (the shaft on which the rear wheel is mounted). The short output shaft is used on vehicles with one rear shock absorber, and the long shaft is used on vehicles with two rear shock absorbers. If the short shaft is needed, it can easily be taken from the original engine.
Important! Check the oil level in the gearbox and engine after assembly. Due to the oil quality of Chinese manufacturers, we recommend to change the oil after 50km break-in time. The valve clearance should also be checked. Both valves should be set to a dimension of 0.08mm.
Overall, this complete engine offers a cost-effective alternative to complex and expensive repairs.
Scope of delivery currently as shown in product photo 2 with kick starter and air filter.
The replacement of the complete engine is generally only to be carried out by specialist workshops.AI-translation
Deviations may occur with the gearbox output shaft. There are two variants: Engine with short or long output shaft (the shaft on which the rear wheel is mounted). The short output shaft is used on vehicles with one rear shock absorber, and the long shaft is used on vehicles with two rear shock absorbers. If the short shaft is needed, it can easily be taken from the original engine.
Important! Check the oil level in the gearbox and engine after assembly. Due to the oil quality of Chinese manufacturers, we recommend to change the oil after 50km break-in time. The valve clearance should also be checked. Both valves should be set to a dimension of 0.08mm.
Overall, this complete engine offers a cost-effective alternative to complex and expensive repairs.
Scope of delivery currently as shown in product photo 2 with kick starter and air filter.
The replacement of the complete engine is generally only to be carried out by specialist workshops.
€575.98 *
incl. VAT plus shipping costs
Item is available and will be ordered for you (delivery time 2-5 working days for instant payment with credit card or Paypal)
P
For this item you get
fidelity point/s
| Customers alternatively searched for | |
|---|---|
| Motor | Motor | Triebwerk | Motorblock | Komplettmotor | Kompletter | Block | Antriebseinheit | Motor | Rollermotor | Ersatzmotor | Tauschmotor | Aggregat | Murl | Maschine | engine | motor | Moteur | motore | | |
Recently viewed items